Textile Testing Machine

ASTM D3776 ISO 3801 BS 3424 Textiles Fabric Weight Tester Paper Weight Testing Machine Introduction The fabric weight tester is used for testing the unit area weight of various textile fabrics and materials. It is equipped with an imported sensor-specific textile electronic scale and a lightweight aluminum alloy disc sampler. The testing is precise, the operation is simple, and the service life is long. The disc sampler takes a standard circular sample of 100 cm² from the

BS 1006 G02 Smoke Testing Chamber Smoke Laboratory Tester AATCC 23 Testing Machine Introduction The samples and the test control fabric were simultaneously exposed to the nitrogen oxide smoke produced by the gas combustion until the color change of the control fabric was consistent with the standard fading. The color fastness grade was evaluated by comparing the color change of the sample with the standard gray card. If no color change was observed in the sample after one

FZ/T 20021 ISO 3005 BS 4323 Steam Vapor Shrinkage Rate Testing Chamber Vapour Test Machine Introduction The steam testing chamber utilizes an in-built steam generator to test the steam expansion dimensional stability of fabrics under no-load conditions. It is equipped with a stainless steel sample holder and an automatic timing device, allowing for the simultaneous testing of 4 pieces of fabric. It is also equipped with a steam stability shrinkage ruler to measure the

ISO 105 E04 BS 1006 DIN 54005 Sweat Staining Color Fastness Testing Machine Textile Colour Fastness Tester Introduction The sweat staining color fastness tester is widely used to test the color fastness of textiles to sweat, seawater, saliva, distilled water, etc. The sample is combined with the specified backing fabric, treated with the test solution, the test solution is removed and placed in the middle of the test sample plate, and then pressure is applied under the