P+F Sensors

P+F K-LB-1.30G Surge Protection Barrier 8 Terminals For Unprotected Area Product Overview 1-channel surge protection barrier Mounts on DIN mounting rail Suitable for intrinsically safe or non-intrinsically safe 30 V applications Protects field or control circuit inputs Maximum surge current (8/20 µs) 20 kA Features uninterruptible operation with auto reset Safety Integrity Level (SIL) 3 according to IEC/EN 61508 Key Specifications Attribute Value Number of protected signal

P+F Inductive Ring Sensor RC15-14-N3 Key Features 15 mm inside diameter Bistable switching function Direction detection capability High passage speed up to 10 m/s Normally closed (NC) output 2-wire NAMUR output type Technical Specifications Attribute Value Switching function Normally closed (NC) Output type 2-wire Inside diameter 15 mm Measuring cylinder Fe-metal Diameter 3 mm Length 4 mm Passage speed ≤ 10 m/s Detailed Technical Data Nominal voltage: 8.2 V (Ri approx. 1 kΩ)

P+F Switch Amplifier KCD2-SOT-1.LB Power Dissipation ≤ 700 MW Rated Voltage 19-30 V DC Product Overview Switch Amplifier KCD2-SOT-1.LB 1-channel signal conditioner 24 V DC supply (Power Rail) Dry contact or NAMUR input 2 passive transistor outputs Usable as signal splitter (1 input and 2 outputs) Reversible mode of operation Line fault detection (LFD) Housing width 12.5 mm Up to SIL 2 (SC 3) acc. to IEC/EN 61508 Technical Specifications General Specifications Attribute Value

P+F Inductive Sensor NBN40-U1-E2 0-32.4mm Assured Operating Distance Key Features Sensor head bidirectional and rotatable 40 mm non-flush 3-wire DC 4 LEDs indicator for 360° visibility IP68 / IP69K protection rating Wide operating temperature range: -25°C to 85°C Technical Specifications Attribute Value Switching function Normally open (NO) Output type 3-wire PNP Rated operating distance 40 mm Assured operating distance 0 ... 32.4 mm Actual operating distance 36 ... 44 mm

P+F Connection cable V1-W-BK2M-PUR-U-V1-G Cordset M12 socket angled to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistant Key Specifications Attribute Value Connection Socket Construction type M12 Style Angled Locking Screw connection Number of pins 4 Operating voltage max. 250 V AC/DC Technical Specifications Connector Specifications Connector 1 Connection Socket Construction type M12 Style Angled Locking Screw connection

SIL 3 HART Multiplexer Master KFD2-HMM-16 Key Attributes Attribute Value Labeling Space for labeling at the front Safety Integrity Level (SIL) SIL 3 Degree of protection IEC 60529:2001 Supply Connection Terminals 17+, 18- Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Dimensions 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D), housing type C1 Product Overview The Multiplexer Master KFD2-HMM-16 is a 16-channel device with 24 V DC supply (Power Rail) and HART field

Terminals 14 15 Universal Temperature Converter KFD2-UT2-1 Product Overview The KFD2-UT2-1 is a 1-channel universal temperature converter with 24 V DC supply (Power Rail) capability. It accepts thermocouple, RTD, potentiometer, or voltage inputs and provides current output of 0/4 mA to 20 mA in sink or source mode. Configurable via PACTware, this converter features line fault (LFD) and sensor burnout detection, achieving up to SIL 2 safety integrity level. Key Features

IP68 Od 18mm P+F Sensors NBB5-18GM50-E2-V1 Product Attributes Attribute Value Degree of protection IP68 Ambient temperature -40 ... 85 °C (-40 ... 185 °F) Dimensions Length 66 mm, Diameter 18 mm Switching function Normally open (NO) PWIS conformity VDMA 24364-A1/B2/C1/T100°C-W Standards EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 Product Description Inductive sensor NBB5-18GM50-E2-V1 Extended temperature range inductive sensor with

IP68 76mm P+F Inductive Sensor NBB8-18GM60-A2-V1 Product Specifications Degree of protection IP68 Ambient temperature -40 ... 85 °C (-40 ... 185 °F) Dimensions Length: 76 mm, Diameter: 18 mm Switching function Complementary PWIS conformity VDMA 24364-A1/B2/C1/T100°C-W Standards EN 60947-5-2:2007, EN 60947-5-2/A1:2012, IEC 60947-5-2:2007, IEC 60947-5-2 AMD 1:2012 Product Description Inductive Sensor NBB8-18GM60-A2-V1 High-performance inductive sensor with extended temperature

34mm IP68 P+F Inductive Sensors NJ2-12GK-SN Key Specifications Attribute Value Degree of protection IP68 Ambient temperature -40 ... 100 °C (-40 ... 212 °F) Dimensions Length: 34mm, Diameter: 12mm Switching function Normally closed (NC) Safety Integrity Level (SIL) SIL 3 Standards EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 Product Description Inductive sensor NJ2-12GK-SN with NAMUR output and safety function, designed for demanding

P+F Female Cordset V1-G-BK10M-PUR-R1 M12 Straight Female Cordset Key Features Highly flexible design suitable for robotics applications Drag chain compatible and abrasion resistant Torsion resistant for demanding environments IP68/IP69 protection rating Free of paint wetting interfering substances Resistant to microbes, hydrolysis, oil, and salt water UL listed for USA and Canada Halogen-free construction Special design prevents loosening and inaccurate installation Product

P+F Inductive Sensor NBN3-F25F-E8-V1 Flush Mountable with Assured Operating Distance 0-2.3 mm Key Features Designed for installation in housing Direct mounting on standard actuators Flush mountable design for space-saving installation Dual normally open (NO) switching function 3-wire PNP output type Technical Specifications Attribute Value Switching function 2 x normally open (NO) Output type 3-wire PNP Rated operating distance 3 mm Assured operating distance 0 ... 2.3 mm

35VDC SIL 2 P+F Current Driver KFD2-CD-Ex1.32 Product Overview 1-channel isolated barrier with 24 V DC supply (Power Rail), featuring current input and output of 0 mA to 20 mA with 0.1% accuracy. Certified for Safety Integrity Level (SIL) 2 according to IEC/EN 61508. Key Specifications Attribute Value Labeling Space for labeling at the front Safety Integrity Level (SIL) SIL 2 Degree of protection IEC 60529:2001 Supply Connection Power Rail or terminals 7+, 8- Ambient

SIL 3 HART Multiplexer P+F Sensors Slave KFD0-HMS-16 Product Specifications Attribute Value Leakage current < 3 µA at -20 ... 85 °C (-4 ... 185 °F) Labeling Space for labeling at the front Safety Integrity Level (SIL) SIL 3 Degree of protection IEC 60529:2001 Supply Connection Via 14-channel flat cable form master KFD2-HMM-16 Output resistance 100 Ω or smaller, capacitive coupling Ambient temperature -20 ... 65 °C (-4 ... 149 °F) Dimensions 20 x 93 x 115 mm (0.8 x 3.7 x 4.5

20mA 24VDC P+F Repeater KFD0-CS-Ex1.50P Product Specifications Attribute Value Signal type Analog input/analog output Systematic capability (SC) SC 3 Safety Integrity Level (SIL) SIL 2 Degree of protection IEC 60529:2001 Accuracy 0.1 % Electromagnetic compatibility NE 21:2012 EN 61326-3-2:2008 Ambient temperature -20 ... 70 °C (-4 ... 158 °F) Dimensions 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D), housing type B1 Product Description Repeater KFD0-CS-Ex1.50P 1-channel

IEC 60529:2001 P+F Sensors Switch Amplifier KFA6-SR2-Ex2.W Key Specifications Signal type Digital Input Supply Connection terminals 14, 15 Safety Integrity Level (SIL) SIL 2 Degree of protection IEC 60529:2001 Display elements LEDs Electromagnetic compatibility NE 21:2006 Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D), housing type B2 Switch Amplifier KFA6-SR2-Ex2.W 2-channel isolated barrier with 230 V AC

P+F 18mA Rotation Speed Monitor KFA6-DWB-Ex1.D Key Features 1-channel isolated barrier with 230 V AC supply Accepts dry contact or NAMUR inputs (1 mHz ... 5 kHz) 2 relay contact outputs with configurable start-up override Keypad configuration and line fault detection (LFD) SIL 2 safety rating per IEC/EN 61508/61511 Compact 40 mm housing width with DIN rail mounting Technical Specifications Attribute Value Safety Integrity Level (SIL) SIL 2 Supply Connection terminals 23, 24

SC 3 P+F Sensors SMART Transmitter Power Supply KCD2-STC-Ex1.2O Product Overview 1-channel isolated barrier with 24 V DC supply (Power Rail) designed for 2-wire SMART transmitters and current sources. Features signal splitting (1 input and 2 outputs) with dual output options of 0/4 mA ... 20 mA or 0/1 V ... 5 V. Key Features Terminal blocks with test sockets SIL 2 (SC 3) compliant per IEC/EN 61508 Compact 12.5 mm housing width 1-channel configuration HART communication

IP20S P+F MART Current Driver KCD2-SCD-Ex1 Product Overview The KCD2-SCD-Ex1 isolated barrier is designed for intrinsic safety applications. It repeats input signals from control systems to drive HART I/P converters, electrical valves, and positioners in hazardous areas. Digital signals are superimposed on analog values and transferred bi-directionally between field and control sides. Key Features Analog output signal type with SIL 2 safety integrity level Bi-directional HART

50mA DC Version P+F Zener Barrier Z787 50mA Key Specifications Attribute Value Type DC version, positive polarity Fuse rating 50 mA Voltage drop terminals 4, 5: 1.2 V + (36 Ω x signal current) Series resistance min. 301 Ω Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Degree of protection IP20 Product Overview The Zener Barrier Z787 is a 2-channel, DC version with positive polarity, designed for DIN rail mounting with diode return capability. It features a working voltage