ABB PLC

ABB Bailey NTMP01 processor termination unit for documented RS-232, RS-485 and control-station serial connections in Harmony and INFI 90 systems.

ABB Bailey NTCL01 communication termination unit for documented twinax or coax INFI-NET, Plant Loop and Symphony Plus Cnet connections.

ABB NTDI02 Harmony digital I/O termination unit with up to 16 field-signal paths, configurable dipshunts, jumpers and split field-power protection.

ABB Bailey NTAO02 termination unit for installed-base maintenance, planned spares and like-for-like replacement.

ABB NTAI05 analog input termination unit for 15 field signals and the SPFEC module, with official system context, HART extension guidance and RFQ support.

INICT13 INFINET Communication Module for Symphony / INFINET; official ABB documentation, verified technical scope, procurement and maintenance guidance.

The processing half of a Cnet-to-HCU communication interface. INNPM12 works with INNIS01 to move system messages between the control network and Harmony controller modules, with documented support for redundant interface arrangements and legacy INFI 90 migration.

ABB Bailey IMASM03 eight-channel isolated three-wire RTD slave module for IMAMM03-based INFI 90 analog input systems.

ABB SPFEC12 Symphony Plus HR 15-channel analog input module for 4-20 mA and configurable voltage signals, with verified ABB migration guidance.

ABB Bailey IMFEC12 Analog Input Module The ABB Bailey IMFEC12 is a High Level Analog Input (FEC) Module for the INFI 90 OPEN system. It accepts analog signals from conventional transmitters and standard analog sources and communicates process data to an MFP or MFC through the I/O expander bus. Technical Specifications Parameter Specification Part Number IMFEC12 Product Type High Level Analog Input (FEC) Module System INFI 90 OPEN Input Channels 15 Input Signals 4-20 mA, 1-5

ABB SPASO11 Analog Output Module – Harmony Rack I/O ABB SPASO11 is an Analog Output Module for the Harmony Rack I/O system within the Symphony Plus platform. It provides 14 independently configured analog output channels for process control applications and supports output signal readback. Technical Specifications Part Number SPASO11 Product Type Analog Output Module I/O Type Analog Output (AO) Number of Channels 14 Channel Configuration Independently configured Resolution 10

ABB IMASO11 Analog Output Module – INFI 90 OPEN ABB Bailey IMASO11 is an Analog Output (ASO) module for the INFI 90 OPEN Strategic Process Management System. It interfaces control modules with process field devices and is used by multifunction processor (MFP) or multifunction controller (MFC) modules to control process outputs. The module uses closed-loop output circuits with signal readback for output monitoring. Technical Specifications Product type Analog Output Module

ABB IMASI13 Analog Input Module – 16-Channel, 24-Bit A/D, Harmony Rack I/O ABB Bailey IMASI13 is a Harmony rack I/O analog input module for the Symphony Enterprise Management and Control System. It interfaces analog field signals with the control system. Key Features Independent channel configuration Isolated A/D conversion Automatic and field calibration Cold-junction compensation Engineering-unit conversion Open-input detection Built-in diagnostics I/O expander bus

ABB SPASI23 Isolated Analog Input Module – Harmony Rack I/O, 16-Channel ABB SPASI23 is an isolated analog input module for the Harmony rack I/O system. It handles up to 16 independently configured analog inputs and supports thermocouple, millivolt, RTD, and high-level signals. The module performs A/D conversion, signal correction, calibration, cold-junction compensation, and engineering-unit conversion for supported inputs. Technical Specifications Manufacturer ABB Part

ABB IMSPM01 Serial Port Module – INFI 90 Product Overview The ABB Bailey IMSPM01 is a Serial Port Module (SPM) for the INFI 90 Process Control System. It provides a computer interface to modules installed in an INFI 90 Process Control Unit (PCU). The module supports computer-based configuration, tuning, status monitoring and data transfer. Technical Specifications Module Type Serial Port Module (SPM) Processor 8-bit microprocessor Processor Clock 2 MHz UVROM 24 Kbytes SRAM 4

ABB IMMFP02 Multi-Function Processor Module – INFI 90 The ABB IMMFP02 is a Multi-Function Processor Module for the INFI 90 control system. ABB documentation describes it as a user-configurable controller for complex control applications, supporting analog and digital I/O, serial communication, Controlway communication and redundant operation. ABB identifies IMMFP02 as a Multi-Function Processor Module within the Symphony Harmony product line . Technical Specifications Model

ABB SPBRC300 Harmony Bridge Controller – HR Series ABB SPBRC300 is a Harmony Rack (HR Series) Bridge Controller used in ABB Ability™ Symphony® Plus control systems. ABB identifies the SPBRC300 as one of the HR Series BRC controllers, together with the SPBRC400 and SPBRC410. The HR Series was developed to support existing Harmony control investments while providing compatibility with multiple generations of Harmony and related I/O systems. Product Specifications Manufacturer

ABB SPBRC400 Harmony Rack Bridge Controller with 2 MB NVRAM ABB SPBRC400 is a Harmony Rack (HR Series) Bridge Controller with expanded memory for ABB Symphony Harmony control systems. ABB identifies SPBRC400 as a "Controller with Expanded Memory" and classifies it as a Central Unit. Technical Specifications Part Number SPBRC400 Product Type Central Unit Product Description Controller with Expanded Memory Product Family Harmony Rack (HR Series) Application Symphony Harmony

ABB DSQC697 3HAC037084-001 is a DeviceNet communication board for IRC5 Single robot controllers, requiring RobotWare 5.13 or higher. In stock for legacy robot-cell maintenance.

IH581/B 3BSC640008R1 Enhanced Industrial Operator Trackball for ABB Advant Master DCS Consoles Product Overview The ABB IH581/B (3BSC640008R1) trackball is engineered for industrial control rooms, offering high-precision positioning and rugged durability as the standard input device for ABB Advant Master DCS consoles. Product ID: 3BSC640008R1 (ABB Sweden) Net Weight: 1.3 kg - Solid metal chassis ensures perfect stability on operator consoles Type: Enhanced Industrial