Overhead Insulated Cable

APPLICATION: Multi-Conductor Aluminum Self-Supporting Cables (CAAI) are used for low-cost overhead electrical power distribution networks in urban and rural areas. They are installed on poles or attached to walls, in both cases, with the appropriate accessories. They do not require the use of insulators. 2. DESIGN VOLTAGE: U0 / U = 0.6/1 kV. 3. OPERATING TEMPERATURE: 90°C on the conductor, for continuous operation. 130°C under emergency conditions. 250°C under short-circuit

2*16mm2 overhead AAC conductor XLPE insulation aluminum wire twisted ABC cable Standard :NFC 33-209 Construction : 1.Conductor: Stranded Aluminium wire conductor 2.Insulation:XLPE (cross-linked polyethylene)or PE (weather resistant) 3.Insulation Color: Black Characteristic : 1.Temperature Rating:-20ºC up to +90ºC 2.Voltage Rating:600/1000V 3.Min inner bending radius: Up to 25mm:4x overall diameter Above 25mm:6x over diameter 4.Behaviour in fire: Flame retardant cable acc.to

0.6/1kv Aluminum/Aluminum Alloy Conductor XLPE Insulated 2*1/0+1/0 (AAAC) AWG ABC Cable Overhead Bundled Electric Wire Service Drop Triplex APPLICATION The cables are designed for aerial power lines and room-entrance wires with AC rated voltage from 0.6/1kV to 6/10kV. CONSTRUCTION Phase Conductor: Aluminum Conductor. Phase Insulation: XLPE, PE or PVC, generally use XLPE. Neutral Conductor: AAC, AAAC or ACSR, generally use AAAC. Lighting Cable(In NFC-33 209 Standard): Aluminum

Overhead Insulated Aluminium Conductor 4X16 4X25 4X35 4X50 mm2 4 Cores Low Voltage Aerial Bundled ABC Cable APPLICATION XLPE insulated Aerial Bundled Cables For distributive low overhead network in the city, pros urban and rural areas. For supply of remote facilities and villages of temporary and permanent character.For above-ground house connections. CONSTRUCTION Phase conductor: Circular compacted Al rope, class 2 Neutral conductor: Circular compacted Al or Al. Alloy rope,

1/0 AWG POLY / ALUMINIUM QUADRUPLEX CABLE, 19 STRANDS ICEA S-76-474 Application To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75°C maximum. Applicable Standard ASTM B 230 ASTM B 231 ASTM B 232 ASTM B 233 ICEA S-66-524 (NEMA WC7) Construction Concentric strand or compressed 1350-H19 conductor, polyethylene or cross-linked polyethylene insulation,

0.6~1kV Low Voltage XPLE insulated Aerial Bundled Cables 3x25MM2 IEC 60502 Application The cables are intended for overhead power lines and input wires with voltages up to 0.6/1 kV inclusive. Used for hanging works such as street lighting, outdoor lighting and temporary construction maintenance. which increases the safety and reliability of using electrified wire mesh. Cable Construction Phase conductor: Aluminum stranded (AAC) Neutral conductor: Aluminum stranded (AAC),

0.6/1kv Overhead Insulated Cable AAC/XLPE+AAAC/XLPELow Medium Voltage Twisted Aerial Overhead ABC Cable Application Aerial Bundled Cable(overhead cables)is applied for elelctric power distribution in low voltage metropolitan,suburban and rural networks,for public lighting and house connections.Laid on pillars and house fronts. Cable Construction 1.Conductor: Stranded Aluminium wire conductor 2.Insulation:XLPE (cross-linked polyethylene)or PE (weather resistant) 3.Insulation

Product Description: MV tree cable. This type of cable is commonly used in power distribution systems, especially in urban and rural areas, to supply medium-voltage power to various locations from a single source. Technical Parameters: 3-Layer 15kV ACSR Tree Wire Size (AWG or kcmil) Stranding Conductor Diameter (mils) Covering Thickness (mils) Cable O.D. (mils) Conductor Shield Inner Layer Outer Layer 4 6/1 250 15 75 75 580 2 6/1 316 15 75 75 646 1/0 6/1 398 15 75 75 728 2/0

Product Description: Covered Aerial MV Cable – Installed with other Covered Aerial MV cables and a supporting messenger through a series of space-maintaining devices (spacers). The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation, which is particularly useful in congested areas. Tree Wire – Used for spans where trees crowd the right-of-way, such as in wooded residential areas, when a minimum of interference with

Product Description: Covered Aerial MV Cable – Installed with other Covered Aerial MV cables and a supporting messenger through a series of space-maintaining devices (spacers). The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation, which is particularly useful in congested areas. Tree Wire – Used for spans where trees crowd the right-of-way, such as in wooded residential areas, when a minimum of interference with

Product Description: Tree wire or covered open wire consists of the conductor (aluminum, aluminum alloy, or ACSR ) and the extruded covering (conductor shield, low-density inner layer, and protective outer layer). Covering thickness depends on the system voltage. Technical Parameters: 3-Layer 15kV AAAC Tree Wire Size (AWG or kcmil) Stranding Conductor Diameter (mils) Covering Thickness (mils) Cable O.D. (mils) Conductor Shield Inner Layer Outer Layer 4 7 250 15 125 125 780 2

Product Description: Used for primary and secondary overhead distribution where limited space is available or desirable for rights of way. Installed as an uninsulated conductor; however, covering is effective in preventing direct shorts and instantaneous flashovers should tree limbs or other objects contact conductors in such proximity. The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation; particularly useful in

NFC 33-209 Aerial Bundle Conductor ABC Cable 3x95+54.6+16mm2 ABC Cable 3x95+54.6+16mm2 Application Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire hazards. The XLPE covering contains a high level of carbon black for UV resistance. It is designed for where reliability, safety and low installation cost are required, but it is only for short spans

Application: Primarily used for 120 volt overhead service applications such as street lighting,outdoor lighting,and temporary service for construction.To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75oC for polyethylene insulated conductors or 90oC for crosslinked polyethylene(XLP)insulated conductors. Construction: Model NO. AAC AAAC Current DC & AC Insulation Material XLPE Sheath Material None Certification ISO, CCC,

Application Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire Aerial Bundled Cable is designed for residential and rural areas for reducing the bushfire hazards. The XLPE covering contains a high level of carbon black for UV resistance. It is designed for where reliability, safety and low installation cost are required, but it is only for short spans due to increased weight. Cable Construction 1. Phase Core Conductor: Aluminum 1350

OVERHEAD XLPE COVERED CABLE CCSX CABLE 35KV AAAC/SC/XLPE 1X185MM2 EN50397 APPLICATION :OVERHEAD XLPE COVERED CABLE CCSX CABLE 35KV AAAC/SC/XLPE 1X185MM2 EN50397 are used for primary and secondary overhead distribution where limited space is available or desired for rights-of-way. Installed the same as bare conductors, however, covering cable is effective in preventing direct shorts and instantaneous flash overs should tree limbs or other objects contact conductors in such

QUADRUPLEX OVERHEAD SERVICE CABLE AERIAL BUNDLED CABLE 4X35MM2 Conductor: Aluminum Wire, 1350-H19 for Electrical Purposes. Insulation: XLPE Standards: GB/T 12527-2008, IEC60502-1, NFC 33-209 Rated voltage: 0.6/1kV Relative manufacturing standards: IEC61089, ASTM B231, ASTM B232, BS215, DIN48201, DIN48204. We can also manufacture ABC cable according to customer's special requirements. QUADRUPLEX OVERHEAD SERVICE CABLE AERIAL BUNDLED CABLE 4X35MM2​ Application: APPLICATION:

OVERHEAD INSULATED CABLE 15KV AAC/SC/XLPE 1X120MM2 EN50397 APPLICATION : Medium voltage overhead construction is similar to bare wire construction except the cables are insulated. These cables are usually supported by polymeric pin insulators or polymeric post insulators and terminated using deadends. Lightning protection is essential to prevent insulation breakdown at support positions during the passage of lightning surges. Temperature : - Normal operation 90°C. - Emergency

Product Description: Its rated voltage of 15KV, 25KV, and 35KV makes it ideal for use in medium to high voltage power systems. The cable has a Polyethylene (PE) or Cross-linked Polyethylene (XLPE) inner layer, which is black in color and weather-resistant. This feature makes it ideal for use in different weather conditions, including harsh weather. The Overhead Insulated Cable product is available in both non-compacted or compacted All Aluminum Alloy Conductor (AAAC) options.

Product Description:The Conductor Shield of the Overhead Insulated Cable is made of Semi-conducting Cross Linked Polymer, which provides excellent protection against electrical interference, corrosion, and moisture. This ensures that the cable operates at optimal performance levels, even in harsh environments.The Outer Layer of the cable is made of HDPE (High-Density Track-Resistant Crosslinked Polyethylene). This material is highly resistant to impact, abrasion, and