Mining Equipment

Sand-vik Starter 77017179 1. Basic Information Part No.: 77017179 Name: Starter Motor / Electric Starter Brand: c Application: Suitable for underground and surface rock drills including Sand-vik DD422i, DD421, matched with starting systems of diesel engines. Function: Drives cold start of the engine and delivers high torque to crank the engine for ignition. Designed for heavy-load and high-dust working conditions in mines. Structure: 24V DC brushed motor + planetary reduction

All Components for Anbaituo (Formerly Atlas Copco) Drilling Rigs and Rock Drills I. Drilling Tool and Consumables Various types of ball-point drills, straight-bit drills, and cross-bit drills Hydraulic trolley drill rod, pneumatic drill rod, quick-connect drill rod Standard tailpiece, extended tailpiece, special tailpiece Drill rod connection sleeve, reducing joint, transition joint Guide sleeve, thrust ring, positioning sleeve, dust cover Clamping card, brazing card spring,

I. Basic Model Compatibility Original Part No.: VOE14660989 (Bucket Cylinder Seal Repair Kit) Applicable vo lvo Models: EC350E, EC380D, EC380DHR, EC380E, EC380EHR Matching Bucket Cylinder Specs Cylinder Bore Diameter: 120mm Piston Rod Diameter: 80mm Rated System Working Pressure: 32MPa, Peak Boost Pressure: 35MPa Net Weight Per Set: Approx. 0.88–1.05kg II. Seal Components Included Complete seals for piston rod side and piston side, no extra spare parts required: 1 × Wiper

Sand-vik 55194637 Safety Proportional Valve Part No. 55194637 is an original electro-hydraulic proportional relief valve for Sand-vik DD/DL series underground drill rigs. It realizes stepless proportional pressure regulation and overpressure protection for hydraulic systems. This cartridge valve comes in black finish. 1. Basic Information Part Number: 55194637 (Full code: 551 94637) Brand: Sand-vik Type: Proportional pressure relief valve with safety unloading function

6ST-100 Battery for Sand-vik DD / DL Series The 6ST-100 is a 12V 100Ah lead-acid starting battery (GOST standard 6СТ-100). It serves as the starting and auxiliary power supply for Sand-vik DD/DL series underground drilling rigs, and is a direct replacement for the original 12V 95Ah/145Ah AGM batteries. Core Specifications Model: 6ST-100 Rated Voltage: 12V Rated Capacity: 100Ah (20-hour rate) Starting Current: 800-830A (EN standard) Dimensions (L × W × H): 353 × 175 × 190 mm

Sand-vik Part 15020678 Flush Head Seals 1. Basic Specifications Original Part Number: 15020678 Official Name: Flush Head U-Seal / Flushing Head O-ring Product Type: U-shaped sealing ring exclusively for flushing water heads Packaging Standard: Original factory polybag, approximately 12 pieces per bag Function: Installed inside the flushing water assembly of rock drills. It seals water circuits to prevent flushing water leakage and maintain stable water pressure for rock drill

Sand-vik DD/DL Series + Maintenance Kit BG00800260 BG00800260 is an original Sand-vik maintenance kit for rock drills and drill rigs. It is specially designed for DD series development drill rigs and DL series longhole drill rigs, and applied for standard maintenance at 250/500/1000 working hours. 1. Compatible Models DD Development Drill Rigs DD220L, DD310, DD311, DD320, DD321, DD410, DD420/422i, etc. DL Longhole Drill Rigs DL210, DL320, DL321, DL330, DL410, DL421, DL430

The Full Range of Accessories for Epiroc and Atlas Drilling Rigs Product Properties Exceptional Compatibility Strictly adhering to original manufacturer design standards, these accessories seamlessly integrate with the full range of Epiroc and Atlas drilling rigs, ensuring precise fit without requiring additional calibration for quick installation and operation. Exceptional Durability Utilizing high-quality raw materials and advanced manufacturing processes, the components

Sand-vik 86665709 Guide Valve (for DD/DL Series Drills) Part No.: 86665709 This is an OEM hydraulic guide valve for Sand-vik DD and DL series underground drill rigs. It regulates hydraulic oil flow and pressure to ensure smooth switching of drilling functions including percussion, rotation and feed. Basic Specifications Part Number : 86665709 Name : Guide Valve / Directional Control Valve Applicable Models DD Series: DD322i, DD422i, DD422iE DL Series: DL421, DL422i, DL422iE,

Atlas Copco / Epiroc 3115376800 Nitrogen Supply Valve (for Rock Drills) Part No.: 3115376800 Also known as nitrogen charging valve / nitrogen inlet valve for Atlas Copco (now Epiroc) hydraulic rock drills. Used to fill, hold, and service nitrogen pressure in the accumulator. Basic Info Part Number : 3115376800 (3115 3768 00) Description : Nitrogen Supply Valve / Charging Valve Brand : Atlas Copco / Epiroc Type : High‑pressure valve, steel body, with seal assembly Weight : ~1

Part No. :2310031946 Description :Hydraulic Cylinder for DM3011 Lifting Tower Brand :Atlas Copco Applicable Equipment :Lifting Tower Assembly of DM 3011 Tightening Workstation Part Type :Hydraulic Lift Cylinder Assembly (including piston rod, cylinder tube and seal kit) Material :Cylinder tube: high-strength alloy steel; Piston rod: hard chrome plated wear-resistant steel; Seals: oil-resistant FKM rubber Function :Drive vertical movement of DM3011 lifting tower; carry load of

Product Overview The Centering Bushing Housing (Part No. 2310114871) is a genuine Atlas Copco OEM structural spare part designed for the DM 3011 Tightening Assembly Workstation. This precision-machined housing serves as the bushing seat, holding and fixing the centering bushing (Part No. 2310114885) to maintain accurate coaxial alignment during tightening operations. Specifications Part Number 2310114871 Description Centering Bushing Housing for DM3011 Workstation Brand Atlas

Atlas Copco 2310114885 (Bushing for DM3011 Workpiece Centering Device) Part No.: 2310114885 Applicable Model: DM 3011 Workstation / Tightening Station Part Name: Centering Bushing Basic Product Information (from spare parts manual) Part Type: Centering Bushing (Sleeve / Plain Bushing) Equipment Series: Atlas Copco DM3011 Assembly Workstation (Torque Tightening Station) Material: Wear-resistant alloy / High-strength self-lubricating bushing material (original factory standard,

Sand-vik 85336089 (Joystick for DD/DL Series) 1. General Description Part number 85336089 is an original Sand-vik 24V electronic joystick. It is mainly applied to Sand-vik DD development drill rigs, DL longhole drill rigs and some LH underground loaders, delivering precise control over boom movement, feed, rotation, travelling and other operations. 2. Main Specifications Part No.: 85336089 (Genuine Sand-vik) Type: Electronic proportional joystick (2-axis / 3-axis) Working

TML Technik UNIDACHS 845 Cabin Door Assembly 20300044-002 TML Technik UNIDACHS 845 Part No.: 20300044-002 Cabin Door Assembly Basic Information Original Manufacturer: TML Technik GmbH, Germany Compatible Machine: UNIDACHS 845 Steel Furnace Demolition Machine Part Description: Complete Operator Cabin Door German Name: Kabinentur komplett Origin: Made in Germany Assembly Scope Complete unit including door frame, heat-resistant safety tempered glass, door lock assembly, hinges,

I. Basic Model Compatibility Original Part No.: VOE21900852 (Short Code: 21900852) Cross Reference No.: 20873675, 20783917, 20786708 Product Name: Fuel Filter Housing Integrated Manual Priming Pump Applicable vo lvo Engines: D11, D12, D13, D16 Applicable Equipment: Excavator: EC330B, EC360B/C, EC460B, EC700B Wheel Loader: L150E/G, L180E/G, L220E/G, L250G, L350F Articulated Hauler: A25E, A30E, A35D Truck & Generator Set: FH12, FM12, TWD1643, TAD1641GE II. Core Technical

English Product Introduction Basic Info Product Name: Grinding Machine Wheel Cap Part No.: 5000-08 Mounting Inner Diameter: 8 mm Brand: Sand-vik Product Description This wheel cap is an original spare part for Sand-vik drill bit grinding machines. It is designed as a safety protective cover for the grinding wheel, effectively blocking broken wheel debris and preventing dust splashing during the grinding process to secure operators. With an 8mm mounting bore, it perfectly

Sand-vik Rock Drill Seal 87218939 Part No.: 87218939 Name: U‑Seal / Hydraulic U‑Cup Seal Brand: Sand-vik Fits: Sand-vik DD311, DD321, DL421 series underground rock drills Function: Hydraulic cylinder pressure seal (feed/rotation circuit), prevents internal leakage. 1. Technical Specifications Type: Single‑acting U‑cup (one‑way pressure) Material: NBR (nitrile rubber) standard; FKM upgrade available Pressure: Up to 250 bar (max 300 bar) Temperature: −30 °C to +100 °C (NBR); up

Note: OEM official datasheet not publicly available. Data collected from drill rig service manual and component database. Final values refer to the nameplate on air end housingEpiroc. Item Specification Epiroc Part Number 57577033 Ingersoll‑Rand OEM Part Number 2657577033 Applicable Rig Epiroc DM45‑LP (Low‑Pressure) Blasthole Drill Air End Type Oil‑injected Twin‑Screw Air End, GHH‑RAND OEM for mining mobile drill rig Rotor Profile Tamrotor Enduro rotor profile Drive Method

Technical Specification Lifting Ring Part No. : 92010762 Application : Robbins 73-series Raise Borer 1. General Description Heavy-duty forged lifting ring, specially designed for hoisting, installation, transportation and maintenance of components on Robbins 73-series raise borers. 2. Applicable Equipment Model: Robbins 73R, 73RH C, 73RVF Raise Borer Brand: Robbins (Epiroc Group) 3. Technical Parameters Rated Working Load (WLL): 5000 kg (5 tonnes) Minimum Safety Factor: 5:1