Helipad Lights

AH-HP-B2 LED Heliport Beacon The heliport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. AH-HP-B2 flashes white color 4 times/0.8second and stop for 1.2s, then start new circle for 2seconds(0.8s+1.2s ). Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.2 CAP 437 Electrical Power supply available in DC(12, 48VDC) or AC(110-240VAC) Physical Clear polycarbonate lens for converging

Bule Elevated Taxiway Edge Light Helipad Landing Lighting Heliport Elevated light should not exceed a height of 25cm. There is a fragile coupling in the base connection, so if aircraft hit the light by accident, the base will break immediately to avoid more damage. Compliance l ICAO Annex 14 Volume ǁ Heliports 5.3. l FAA AC 150/5390-2B Heliport Design Guide l CAP 437 Features Electrical l LED as light source saving power consumption and maintenance, 95% less power than

AH-HP/C Heliport Inset Bidirectional Light for Heliport Taxiway and Runway Description Heliport Inset bidirectional light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Center Line Light, Runway Threshold/End Light, Runway Edge Lighting etc. The emitting color is green/green or yellow/red or yellow/green or red/green. Packaging & Delivery Packaging: Plastic bag with outer paper carton 1

Heliport Light Steady Burning Operation Mode 24hours Operation Heliport Inset Light Product Attributes Attribute Value Light Source CREE Ultra High Intensity LED Available Colors Green, White, Yellow, Blue, Red Power(W) ≤8.5W Intensity(cd) ICAO Standard, Refer To Photometric Table Vertical Degree(°) ICAO Specification Flash Characteristics Steady Burning LED Life Experience(hours) >100,000 Horizontal Degree(°) Omni Direction (360°) Product Description The Helipad Lights are

Outdoor LED Garden Lights / Flood Lights Steady - Burning Way Characteristics Visual angle of AH-HP/F Flood light is larger than 150. Light source efficiency is higher than 100Lm/W and service life is more than ten years. Product Application Used in helipad, broadcasting, television, microwave, cellphone station, wall light, garden light and road light, etc Packaging & Delivery Packaging: Paper carton 1-9 piece/box. Delivery: In 2-10 days after payment. After-sales service 1.

Portable Helipad Landing Lights Portable Airfiled Lighting System PALS Infrared LED Wireless Remote Control AH-PA-EMC Portable Airfield Lighting System is specially used on permanent airport/heliport where cable power is not convenient or temporary helipad, especially for medivac and other emergency situations. Highly portable and easy to install the portable landing zone kit provides temporary illumination of any military or civilian helicopter landing surface or airfield.

Waterproof IP66 Internally Illuminated Aerodrome Wind Cone Aerodromes must be equipped with at least one wind cone as a wind direction indicator. This internally illuminated model features a flood light inside the windsock that rotates with it, along with a red low-intensity L810 obstruction light on top for aircraft warning. Key Features Power options: AC (110-240VAC), 12VDC, 48VDC Durable construction: Corrosion-resistant stainless steel 304 pole Dual lighting system:

AH-HP-VASI LED Visual Approach Slope Indicator The LED Visual Approach Slope Indicator (VASI) is used to guide aircraft to approach the runway at an appropriate altitude. It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds. There are three Colors which to show three wide horizontal beams in different colored light. And it is projected in fan shaped array into the incoming flight pattern. The top beam is yellow which indicates

Helipad Landing Lights LED Flood light/ Helipad Flood Light/ LED Flood Light compliance: The lights in accordance with ICAO and FAA regulations and CAP437 (offshore helipads) Detail Description: Visual angle of AH-HP/F Flood light is larger than 150. Light source efficiency is higher than 100Lm/W and service life is more than ten years. Application: It can be widely used in heliport, broadcasting, television, microwave, cell phone station, wall light, garden light and road

Product introduction AH-HP-E-FATO(L) Available Colors Green, Yellow, White, Red, Blue, IR Intensity(cd) ICAO standard Level of protection: IP66 l AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. CAP 437 High-intensity CREE LED as light source saving power

AH-PA-EMC Portable Airfield Light Steady 7.4V/20AH 24hours working AH-PA-EMC Portable Airfield Light is specially used on permanent airport/heliport where cable power is not convenient or temporary helipad, especially for medivac and other emergency situations. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.7.3 ICAO Annex 14 Volume I Appendix 1, fig. A1-1 Features Electrical Ultra High intensity LED as light source saving power consumption and maintenance, 95% less power

LED Heliport Surface Flood Light Steady Burning 30W 110-240VAC Heliport Flood Light Heliport Light Helipad Application l Helipad/Heliport /Helideck SPECIFICATIONS AH-HP-F1 LED Heliport Surface Flood Light Light Characteristics Light Source CREE Ultra high intensity LED Emitting Color White Luminous efficiency: 120lm/W 120lm/W Flash Characteristics Steady burning Operation Mode 24hours operation LED Life Experience(hours) >100,000 Electrical Characteristics Operating Voltage

AH-HP/C Heliport Inset Bidirectional Light Heliport light Helipad lighting Inset Touchdown and Lift-off Area Light compliant with ICAO,FAA,CAAC Applications Heliport Inset bidirectional light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Center Line Light, Runway Threshold/End Light, Runway Edge Lighting etc. The emitting color is green/green or yellow/red or yellow/green or red/green.

Product introduction AH-HP-E-FATO(L) Available Colors Green, Yellow, White, Red, Blue, IR Intensity(cd) ICAO standard Level of protection: IP66 Light intensity adjustable l AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport Compliance l ICAO Annex 14 Volume ǁ Heliports 5.3. l FAA AC 150/5390-2B Heliport

Runway Guard Light Helipad taxiway Flashing 50FPM Yellow Red/Green 220VAC The AH-HP-RG offers a quick and effective solution to airfields, in support of efforts to prevent unnecessary runway incursions and enhance over-all airfield safety. Runway Guard Light is an elevated unidirectional flashing yellow light fixture that provides a distinctive warning to pilots that they are approaching a runway holding position and are about to enter an active runway. Compliance ICAO Annex

Helipad Landing Light and Helipad Runway edge lighting – (ICAO Annex 14) light Product Application Used in helicopter taking off and landing area at night or in the daytime with poor visibility. Function This product is used for shining yellow or green light to accurately indicate the threshold of taking off and landing area. Datasheet: AH-HP-E Heliport Elevated Light.pdf Packaging & Delivery Packaging: Paper carton 1-9 piece/box. Delivery: In 2-10 days after payment. After

AH-HP/E Helipad Landing Lights Elevated Perimeter Light Steady-burning way Product Application Used in helicopter taking off and landing area at night or in the daytime with poor visibility. Function This product is used for shining yellow or green light to accurately indicate the threshold of taking off and landing area. Packaging & Delivery Packaging: Paper carton 1-9 piece/box. Delivery: In 2-10 days after payment. After-sales service 1. 2 years full warranty, 5 years

AH-HP/R Helipad Landing Lights Elevated Apron Edge Light Red Color Description This product is used in helipad apron at night or in the daytime with poor visibility. Product Application Used for shining red light to accurately indicate the threshold of apron. After-sales service 1. 2 years full warranty, 5 years maintenance since the purchasing date. 2.Since the purchasing date, full warranty from 1st year to 2nd year, free maintenance cost and material cost. 3.Since the

AH-HP-PAPI LED Precision Approach Path Indicator The LED Precision Approach Path Indicator (PAPI) is used to guide aircraft to approach the runway at an appropriate altitude. It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds. There are two Colors which to show two wide horizontal beams in different colored light. And it is projected in fan shaped array into the incoming flight pattern. Solar power system is optional for

Final approach and take-off area lighting LED Heliport-Helideck Elevated Light Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport so if aircraft hit the light by accident, the base will break immediately to avoid more damage. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. Features Electrical Power supply