Helipad Lights

Helipad Landing Lights Helipad Final Approach and Take- off area ( FATO) light Product Application Used in helicopter taking off and landing area at night or in the daytime with poor visibility. Function This product is used for shining yellow or green light to accurately indicate the threshold of taking off and landing area. Packaging & Delivery Packaging: Paper carton 1-9 piece/box. Delivery: In 2-10 days after payment. After-sales service 1. 2 years full warranty, 5 years

Red and White Helipad Landing Lights Wind Cone 1.5 Meters Strong Corrosion Resistance Product Application Used in airport and helipad fields for indicating final approach and taking off wind direction Character 1.Wind sock is made of anticorrosion and high temperature resistance PVC material. 2.-1Pc LED aviation obstruction light on top and 2Pcs 6W LED flood light for illumination. (Height of Wind Cone is less than 4 meters) -1Pc LED aviation obstruction light on top and 4Pcs

This AH-MI-B Medium-intensity Type B Aviation Obstacle Light, designed for marking top of obstruction which height is between 45 to 105 meters.Ultra high intensity LED is used as light source which make performance better, and solar panel vertical degree is adjustable(30° ) for get as much as sunlight in different area, suitable many sicuations. Compliance ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Medium Intensity Type B Obstruction Light FAA L-864 Electrical

AH-HP-R2 Airport Rotating Beacon The heliport/Airport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. This Rotated beacons is for night operation as identification and location markers for airports. Compliance FAA L-801, L-802 150/5345-12F ICAO Annex 14 Volume I 5.3.3 Features LED as light source, ≥100,000 hour typical lamp life. Two head, Two emitting color No maintenance All

IP68 Helipad Landing Lights Heliport Civil Airport Lighting System AH-HP-I Serial LED Heliport Inset Light Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, Flight path alignment guidance lighting, etc. The emitting color is green or yellow or

Wind Sock Wind Cone for Indicating Heliport Wind Direction AH-HP/W Wind cone is used for indicate wind direction on helipad. 1. Product Name:Heliport light 2. Mode: AH-HP/WS 3. Standard: ICAO Annex 14 and FAA 4. Height of wind cone: 1.5meters,2.5meters,3.5meters,4meters,5meters,6meters,7meters,etc. 5. Operating voltage:AC220V,50/60 Hz(Option voltage,eg.AC120V,DC48V) 6. Three kind of wind sock: - 1.2 meters length, big diameter is 300mm,small one is 150mm (Height of Wind Cone

Solar helipad lights remote controller, solar taxi way lights, portable airport lighting controller AH-HP-RC Wireless Handheld Remote Controller is used for all ANNHUNG solar/portable airfield light, its communication frequency is 433MHZ, effective distance is up to 3km(more than 3km is customized). This provides an intuitive and easy access to give operators full control over a host of command and configuration messages and can quickly set advanced features from a single

Heliport TLOF Helipad Landing Lights FATO Helideck Elevated Light LED Heliport-Helideck Elevated Light AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport so if aircraft hit the light by accident, the base will break immediately to avoid more damage. The lights could be used as FATO light, TLOF lights,

AH-HP-E Serial LED Heliport-Helideck Elevated Light AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport so if aircraft hit the light by accident, the base will break immediately to avoid more damage. The lights could be used as FATO light, TLOF lights, Taxiway lights. Compliance ICAO Annex 14 Volume ǁ

Three-Lamp Airport Rotating Beacon for Helipad Visual Guidance The LED Airport Rotating Beacon is designed for optimal placement on or adjacent to heliports and airports, preferably at elevated positions to avoid dazzling pilots at short range. This rotating beacon serves as an essential identification and location marker for airports during night operations. Regulatory Compliance FAA L-801, L-802 150/5345-12F ICAO Annex 14 Volume I 5.3.3 Applications Helipad/Heliport

AH-HP/L Helipad Landing Lights LED Light Source For Heliport Runway / Taxi Way AH-HP/L approach lighting system should be provided at a heliport where it is desirable and practicable to indicate a preferred approach direction. The approach lighting system shall be located in a straight line along the preferred direction of approach. AH-HP/L flashing omnidirectional white color(1flash/second) and light intensity up to 3500cd. Steady mode is also available if request. Datasheet

AH-HP-F1 LED Heliport Surface Flood Light LED Surface Heliport Flood Light is used for illuminate the whole heliport area at night. It is specially designed for helipads/Helideck, providing glare-free, uniform surface lighting for landing and loading activities. LED Surface Floodlights improve pilot depth perception by reflecting the surface of the helipad/helideck, allowing pilots to better estimate their altitude during landing. Compliance ICAO Annex 14 Volume ǁ Heliports 5

AH-HP-I-FATO(L) LED Heliport Final Approach and Take-off Area Lighting The objective of a FATO lighting system for onshore surface-level heliports is to provide to the pilot operating at night an indication of the shape, location and extent of the FATO. FATO lights shall be placed along the edges of the FATO and be fixed omnidirectional lights showing white. 8inch International standard mounting for aerodrome inset light. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.7 FAA

Outdoor Controller Helipad Landing Lights Stainless Steel Material Description AH-HP/G Heliport Outdoor Controller use 316 stainless steel material as enclosure with good waterproof, UV protection and surge protection device (anti lightning In 15KA/5, Imax 40KA),so it can be used in very bad environment. Heliport Outdoor Controller can control ON and OFF of all Helipad lighting. Product Application This product is used for control all helipad light. After-sales service 1. 2

Work Stability Helipad Landing Lights / Brightness Led Perimeter Lighting Heliport Elevated Perimeter Light adopts LED Light resource technology, the service life is above 10years, lampshade adopts PC material injection moulding; This product is used for shining yellow or green light to indicate running way ‘s direction and location. Datasheet: AH-HP-E Heliport Elevated Light.pdf Product Application Used in helicopter taking off and landing area at night or in the daytime

Helilport FATO Elevated Light Helipad Landing Lights Infrared LED for pilot using NVG(Night Vision Goggles) SPECIFICATIONS AH-HP-E1 LED Heliport Elevated Light Light Characteristics Light Source Ultra high intensity LED Available Colors Green, Yellow, White, Red, Blue, IR Intensity(cd) ≥50cd Horizontal Output(degrees) 360 Vertical Divergence(degrees) ≥10 Flash Characteristics Steady burning Operation Mode 24hours operation LED Life Experience(hours) >100,000 Electrical

Runway Guard Light for Heliport Unidirectional Flashing Yellow Light Description AH-HP/RG Provide unidirectional flashing to aid in reducing airfield incursions at unmarked runway and taxiway intersections. Runway Guard Light is an elevated unidirectional flashing yellow light fixture that provides a distinctive warning to pilots that they are approaching a runway holding position and are about to enter an active runway. Packaging & Delivery Packaging: Plastic bag with outer

AH-HP-RC Wireless Handheld Remote Controller is used for all ANNHUNG solar/portable airfield light, it’s communication frequency is 433MHZ, effective distance is up to 2km(more than 2km is customized). Pilot and ground work staff could turn on/off light, change light intensity, change the flashing rate of all lights. Compliance ICAO and FAA regulations and CAP437 (offshore helipads) Features ► Light weight for easy hand use ► Function: turn on/off light, choose difference

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. A TLOF lighting system shall be provided at a heliport intended for use at night. TLOF perimeter lights shall be placed along the edge of the area designated for use as the TLOF or within a distance of 1.5 m from the edge. The TLOF perimeter lights shall be fixed omnidirectional lights showing green. 8inch International standard mounting

Product Description Specification SPECIFICATIONS AH-LS-P3 LED Marine Navigation Lanterns Light Characteristics Light Source Ultra high intensity LED Available Colors Red, Green, Yellow, White, Blue Visible Range(NM) Up to 16NM (AT@0.74) Horizontal Output(degrees) 360 Vertical Divergence(degrees) ≥10°or ≥5° Flash Characteristics Adjustable 366 light characters(others optional) Operation Mode Dusk-to-dawn Automatically (Built-in photocell) LED Life Experience(hours) >100,000