Helipad Lights

AH-HP-I-A Aiming Point Light Aiming Point Light 8inch International standard mounting for aerodrome inset light. Features Electrical Ultra high intensity CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light Power supply available in AC(110-240VAC), DC48V Physical Pressure resistance lens allowed the vehicles go through on light Die-casting aluminum covered by color powder coasted which have good corrosion

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. Electrical LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light Power supply available in AC(110-240VAC), DC48V Physical Pressure resistance lens allowed the vehicles go through on light Die-casting aluminum covered by black hard anodizing layer have good corrosion protection and

Broadcasting Helipad Landing Light / LED Flood Light For Cellphone Station Characteristics Visual angle of AH-HP/F Flood light is larger than 150. Light source efficiency is higher than 100Lm/W and service life is more than ten years. Product Application Used in helipad, broadcasting, television, microwave, cellphone station, wall light, garden light and road light, etc After-sales service 1. 2 years full warranty, 5 years maintenance since the purchasing date. 2.Since the

Internally Illuminated Heliport Wind Cone Helipad Landing Lights obstruction light on top for aircraft warning Compliance ICAO Annex 14 Volume ǁ Heliports 5.1.1 FAA AC 150/5390-2B Heliport Design Guide FAA 150_5345_27e FAA SPECIFICATION FOR WIND CONE ASSEMBLIES An aerodrome shall be equipped with at least one wind cone as wind direction indicator. The flood light for illumination is inside wind sock, it will rotate together with windsock too. One obstruction light on top for

FAA Flood Light for Helipad Landing Steading Burning Illuminating Heliport Flood Light is used for illuminate the whole heliport area at night. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.9 FAA AC 150/5390-2B Heliport Design Guide Features Electrical CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light Power supply available in AC(110-240VAC), DC48V Visual angle of AH-HP/F Flood light is larger than 150.

ICAO Heliport Wind Cone, Wind Direction Indicator Wind Sock AH-HP-1S aerodrome shall be equipped with at least one wind cone as wind direction indicator. The flood light for illumination is inside wind sock, it will rotate together with windsock too. One obstruction light on top for aircraft warning. Better design for you. Compliance ** ICAO Annex 14 Volume ǁ Heliports 5.1.1 ** FAA AC 150/5390-2B Heliport Design Guide Features Power supply available in DC(12-48VDC) or AC(110

360° Angle Helipad Landing Lights AH-HP-W-1Internally Illuminated Heliport Wind Cone Heliport Light Helipad Lighting compliant with ICAO,FAA,CAAC Datasheet: AH-HP-W-1 Internally Illuminated Heliport Wind Con... Applications Wind cone is used in airport and helipad fields for indicating final approach and taking off wind direction Product Description Description This product is used for indicating final approach and taking off wind direction. According to ICAO requirement,

AH-HP-I Helipad Landing Lights, green FATO light, TLOF Light, Heliport lighting, ICAO Annex Helipad lighting Helipad Landing Lights, FATO light, TLOF Light Heliport lighting Product Description 1. Product Name:Heliport light 2. Mode: AH-HP-I 3. Standard: ICAO Annex 14 4. Light intensity: ≥100cd 5. Working Mode : Steady-burning mode 6. Light source: LED 7. Service life of LED: ≥100,000hours 8. Operating voltage: AC220V, 50/60 Hz(Option voltage,eg.AC120V,DC48V) 9. Power

AH-HP-I-F Flight path alignment guidance lighting Flight path alignment guidance lighting 8inch International standard mounting for aerodrome inset light. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. FAA AC 150/5390-2B Heliport Design Guide CAAC MH 5001—2013 Aerodrome technical standards CAAC MH 5013—2014 Technical Standards of Civil Heliports Electrical Ultra high intensity CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent

AH-HP-E-FATO(L) Final approach and take-off area lighting AH-HP-E-FATO(L) Final approach and take-off area lighting. There is a fragile coupling in the base connection for heliport so if aircraft hit the light by accident, the base will break immediately to avoid more damage. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. FAA AC 150/5390-2B Heliport Design Guide CAP 437 Electrical High-intensity CREE LED as light source saving power consumption and maintenance, 95% less

AH-HP/F PVC Red and White Helipad Landing Lights Wind Sock Heliport Light Helipad Lighting compliant with ICAO,FAA,CAAC Application Wind cone is used in airport and helipad fields for indicating final approach and taking off wind direction Product Description 1.Product Name:Heliport light 2.Mode: AH-HP/W 3.Standard: ICAO Annex 14 and FAA 4.Height of wind cone: 1.5meters,2.5meters,3.5meters,4meters,5meters,6meters,7meters,etc. 5.Supply voltage:AC220V,50/60 Hz(Option voltage,eg

LED Helipad Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.Protect thr aircraft and extend lamp life. It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, runway, flight path Lighting, etc. The emitting color is green or yellow or white or blue. Die-casting aluminum covered by black hard anodizing layer

AH-HP-E1 LED Heliport Elevated Light Heliport Elevated light should not exceed a height of 25cm.There is a fragile coupling in the base connection, so if aircraft hit the light by accident, the base will break immediately to avoid more damage. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. Features Electrical LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light Power supply available in AC(110-240VAC) and DC48V,

Product Overview ANNHUNG LED Elevated Heliport Light is designed for helipad runway, taxiway, and edge area applications. Featuring green emission color and IP66 waterproof rating, this aviation obstruction lighting provides reliable performance in demanding environments. Key Features Compact design with height not exceeding 25cm Frangible base coupling for aircraft safety - breaks immediately upon impact to prevent damage 360° beam angle for optimal visibility Long lifespan

Red Green White CHAPI Helipad LED Lights Approach Path Indicators AH-HP-CHAPI LED CHAPI Heliport Approach Path Indicators The LED CHAPI Heliport Approach Path Indicators (CHAPI) uses LED technology to provide the pilot with safe and accurate glide slope on final approach to the helipad. A set of two LED CHAPI Light Housing Assemblies (LHAs) are seen by the pilot in combinations of white, green and red to indicate a path that is too high, too low or within the 6° ±0°15' glide

AH-HP-I-TLOF(L) Green LED Heliport Touchdown and Lift-off Area Lighting Steady burning 24hours operation Attribute Value Voltage 110-240VAC Available Colors Green, White, Yellow, Blue, Red Ambient Temperature(℃) -55~70 Product Life Expectancy ≥10 Years Flash Characteristics Steady Burning Light Source LED Weight 4kg Product Description Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. A

Helipad Landing Lights Portfolio Landscape Lighting With Surge Protection, Helipad FATO Light cover adopts PC material with excellent impact resistance, thermal stability, great transparency (available with a light transmission of up to 90%), auto-UV resistance, aging resistance. House of the light is made of aluminum liquid casting and oxidation treatment., the product features are omniseal, water tightness and corrosion resistance. Light source adopts the international

Blue Color Helipad Landing Lights Elevated Taxiway Edge Light Long Life Heliport Elevated Taxiway Edge Light adopts LED Light source technology, the service life is above 10years, lampshade adopts PC material injection moulding; This product is used for shining Blue light to indicate running way ‘s direction and location. Datasheet: AH-HP-E Heliport Elevated Light.pdf Features 1.With work stability, strong anti-interference ability and shock resistance. 2.Full sealed

Aluminum Shell Heliport Flood Light for Illuminating with IP66 Heliport Flood Light is used for illuminate the whole heliport area at night. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.9 FAA AC 150/5390-2B Heliport Design Guide Features Electrical CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light Power supply available in AC(110-240VAC), DC48V Visual angle of AH-HP/F Flood light is larger than 150. Light

AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport so if aircraft hit the light by accident, the base will break immediately to avoid more damage. The lights could be used as FATO light, TLOF lights, Taxiway lights. Compliance l FAA AC 150/5390-2B Heliport Design Guide l CAP 437 Features Electrical l High