Helipad Lights

3W Helideck Circle H Helipad Landing Lights IP68 Waterproof Helideck Circle-H Light is designed for heliport identification marking "H" and the circle. The low-profile design (＜25mm thickness) enables easy installation and suitability for all types of heliports. Compliance ICAO Annex 14 Volume I, Appendix I Nov. 2016, figure A1-1-Colors for aeronautical Ground lights CAP 437 Features Electrical LED light source for reduced power consumption and maintenance - 95% less power

LED Inset Helipad Landing Lights / Heliport Lighting FATO TLOF Light NVG IR LED 850nm Touchdown and lift-off area light emitting green steady burning light at night or in the daytime with poor visibility to provide good visibility. It shall be placed along the edge of the area designated for use as the Touchdown and lift-off area or within a distance of 1.5 m from the edge. Aiming point lights shall be collocated with the aiming point marking. It always emitting white steady

Helipad Landing Lights / Heliport Elevated Lighting White / Green / Yellow LED NVG IR LED＞50cdPerimeter lights shall be placed along the edges of the Helipad Final approach and take-off area. It emit white or green or yellow steady burning light.Application:Helipad/Heliport Touch-down and Lift-off areaHeliport Aming point markingHelideckComplianceICAO Annex 14 Volume ǁ Heliports 5.3.6FAA AC 150/5390-2B Heliport Design GuideCAP437 (Offshore helipad)Product DescriptonSPECIFICAT

Product introduction AH-HP-E-TLOF(L) Available Colors Green, Yellow, White, Red, Blue, IR Intensity(cd) ICAO standard Level of protection: IP66 Light intensity adjustable AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15cm for helideck. There is a fragile coupling in the base connection for heliport ICAO Annex 14 Volume ǁ Heliports 5.3. FAA AC 150/5390-2B Heliport Design Guide CAP 437

AH-HP-E Serial LED Heliport-Helideck Elevated Light AH-HP-E Serial Heliport Elevated lights should not exceed a height of 25cm for Surface-level and Elevated heliports, not exceed a height of 15 cm for helideck. There is a fragile coupling in the base connection for heliport so if aircraft hit the light by accident, the base will break immediately to avoid more damage. The lights could be used as FATO light, TLOF lights, Taxiway lights. Compliance ICAO Annex 14 Volume ǁ

Quantity(Pieces) 1 - 50 >50 Est. Time(days) 15 To be negotiated The LED CHAPI Heliport Approach Path Indicators (CHAPI) uses LED technology to provide the pilot with safe and accurate glide slope on final approach to the helipad. A set of two LED CHAPI Light Housing Assemblies (LHAs) are seen by the pilot in combinations of white, green and red to indicate a path that is too high, too low or within the 6° ±0°15' glide slope. Solar power system is optional for CHAPI.

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Aiming point light, perimeter light of FATO(Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, Flight path alignment guidance lighting, etc. The emitting color is green or yellow or white or blue. 8inch International standard mounting for aerodrome inset light. Compliance ICAO Annex 14

Flight path alignment guidance lighting Helipad Heliport Inset Light Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. FAA AC 150/5390-2B Heliport Design Guide Features Electrical Power supply available in AC(110-240VAC), DC48V Physical Die-casting aluminum covered by color powder coasted which have good corrosion protection and load

LED Light Source Flood Light for Helipad Landing Illumination Characteristics Used in helipad, broadcasting, television, microwave, cellphone station, wall light, garden light and road light, etc Visual angle of AH-HP/F Flood light is larger than 150. Light source efficiency is higher than 100Lm/W and service life is more than ten years. Packaging & Delivery Packaging: Paper carton 1-9 piece/box. Delivery: In 2-10 days after payment. After-sales service 1. 2 years full

AH-HP-RG-S Solar Runway Guard Light is a self-sustaining, completely autonomous airfield lighting technology, designed for permanent, temporary or portable airfield operations. With its self-contained design, the Solar Powered system eliminates the need for conventional power inputs, expensive infrastructure and daily energy and maintenance costs, while increasing airfield safety 24 hours per day in the most challenging climates around the world. The AH-HP-RG-S offers a quick

AH-HP-PAPI LED Precision Approach Path Indicator Heliport Light Product Description The LED Precision Approach Path Indicator (PAPI) guides aircraft to approach the runway at the correct altitude. Specifically designed for helicopters, it accommodates steep descent angles and controlled speeds. The system displays two wide horizontal beams in different colored lights, projected in a fan-shaped array into the incoming flight pattern. PAPI Visual Indication(4 units as one

Helipad Runway Edge Elevated Light Steady burning 24hours operation Heliport Elevated light should not exceed a height of 25cm. There is a fragile coupling in the base connection, so if aircraft hit the light by accident, the base will break immediately to avoid more damage. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3.FAA AC 150/5390-2B Heliport Design GuideCAP 437 Features Electrical LED as light source saving power consumption and maintenance, 95% less power than

AH-HP-R2 Airport Rotating Beacon The heliport/Airport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. This Rotated beacons is for night operation as identification and location markers for airports. Compliance FAA L-801, L-802 150/5345-12F ICAO Annex 14 Volume I 5.3.3 Features LED as light source, ≥100,000 hour typical lamp life. Two head, Two emitting color No maintenance

Helipad Landing Lights and Helipad Touchdown and Lift- off area ( TLOF) light Product Application Used in helicopter taking off and landing area at night or in the daytime with poor visibility. Function This product is used for shining yellow or green light to accurately indicate the threshold of taking off and landing area. Packaging & Delivery Packaging: Paper carton 1-9 piece/box. Delivery: In 2-10 days after payment. After-sales service 1. 2 years full warranty, 5 years

SPECIFICATIONS AH-HP/E LED Elevated Perimeter light/ Helipad Flood Light Light Characteristics Light Source LED Available Colors Green Intensity(cd) ≥25cd Horizontal Output(degrees) 360 Vertical Divergence(degrees) >10 Reflector Type Fresnel Lens Flash Characteristics Steady-burning Operation Mode Dusk-to-dawn Automatically as standard. 24hours operation as option. LED Life Experience(hours) >100,000 Electrical Characteristics Operating Voltage AC220V, 50/60 Hz (Option

Heliport Beacon Flashes White Color Xenon Light Source Polycarbonate Lens Product Application Used on helipad field or airport runway light. Function This product is used for long-distance visual guidance and does not let helicopter feel glaring. After-sales service 1. 2 years full warranty, 5 years maintenance since the purchasing date. 2.Since the purchasing date, full warranty from 1st year to 2nd year, free maintenance cost and material cost. 3.Since the purchasing date,

AH-SA-B Solar Airfield Light is specially used on permanent airport/heliport where cable power is not convenient or temporary helipad. Light weight make it very easy for user to take and move the AH-SA-B. It's very convenient for installation. Fragile coupling need to be paid separately if needed. Better design for customer. Product Compliance: ** ICAO Annex 14 Volume ǁ Heliports 5.3. ** FAA AC 150/5390-2B Heliport Design Guide ** CAP 437 Electrical LED as light source saving

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, runway, flight path Lighting, etc. The emitting color is green or yellow or white or blue. Die-casting aluminum covered by black hard anodizing layer have good corrosion protection and load

Bue LED Helipad Landing Lights Inset Runway and Taxiway Light Product Description 1. Product Name:Heliport light 2. Mode: AH-HP-I 3. Standard: ICAO Annex 14 4. Light intensity: 100cd 5. Emitting color:Green or yellow 6. Light source: LED 7. Service life of LED: ≥100,000hours 8. Operating voltage: AC220V, 50/60 Hz(Option voltage,eg.AC120V,DC48V) 9. Power consumption: 20W 10. Working Mode : Steady-burning mode Compliance l ICAO Annex 14 Volume II Heliports 5.3.7, 5.3.8 l FAA AC

AH-HP-I-TLOF Touchdown and lift-off area lighting Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. 8inch International standard mounting for aerodrome inset light. Compliance ICAO Annex 14 Volume ǁ Heliports 5.3. CAAC MH 5001—2013 Aerodrome technical standards CAAC MH 5013—2014 Technical Standards of Civil Heliports Features Electrical Power supply available in AC(110-240VAC), DC48V