LED Aviation Obstruction Light

LED Medium Intensity Aviation Obstruction Lamp IP68 Obstruction Warning Lights Introduction This LED Medium-intensity Aviation Obstruction Light emitting red color(white color is optional), designed for marking top of obstacle which height is more than 45meters.Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as

White LED Medium-intensity Aviation Obstruction Light with 360 Horizontal Output 3 Vertical Divergence and >100,000 LED Life Product Description The LED Aviation Obstruction Light is a versatile lighting solution designed to provide optimal visibility for aviation safety. With a Vertical Divergence of 3 degrees and an Intensity of at least 2000cd, this light ensures that it meets the necessary standards for aircraft warning and navigation. Operational convenience is a key

ICAO High Intensity Type A LED Aviation Obstruction Light Professional LED aviation obstruction light with polycarbonate body and IP66 rating, designed for maximum visibility and durability in demanding environments. Technical Specifications Light Characteristics Light Source CREE high intensity LED Available Colors White Intensity (cd) ≥200,000cd (Daytime) (ICAO Type A) Optional: 270,000cd±25% (Daytime) (FAA L-856) ≥20,000cd (Twilight) ≥2,000cd (Night) Horizontal Output 90

IP65 AC220V RED LED Aviation Obstruction Light Medium-intensity Light Product Application -High-rise Building -High Chimney -Marking towers (Telecom, GSM, Microwave & TV) -High Pole -Tower Crane -Wind Tubinebridge -Large-scale port machinery -Large engineer machinery and wind turbines. Advantages 1.Good impact protection strength, thermal stability, high transmittance. 2.Built-in circuit protect LED, extremely reliable and cost saving. 3.Shockproof and corrosion resistant.

Flash Mode Tower Warning Lights / Aircraft Obstruction Lights 100W This aircraft warning light is a new generation environmental-friendly solution with super long life expectancy, consisting of fresnel lens, lamp holder, high intensity LED and photo-sensor system. Product Applications High-rise Buildings High Chimneys Marking Towers (Telecom, GSM, Microwave & TV) High Poles Tower Cranes Wind Turbines Bridges Large-scale Port Machinery Large Engineer Machinery Packaging &

Low-intensity L810 Double Solar Aviation Obstruction Light Specification This LED Low-intensity Double Solar Aviation Obstruction light is adopting insert high efficient solar panels integrated design, cooperate with solar dedicated lithium ion battery as power supply. There are two lamps on two arms, one is main lamp, another is standby. When main lamp fail, standby light turn on automatically. 3/4inch thread hole under base is very suitable for pole mounting. Compliance l

2000cd Medium Intensity LED Aviation Obstruction Light Integrated Circuit Protection This ICAO Aviation Obstruction Type B L864 warning light flashing red color, other color is optional designed for marking top of obstacle which height is between 45 to 105 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed lens converging light to very small vertical divergence 3° make it totally compliance

FAA L857 Warning Light, LED High Intensity Wind Turbine Obstruction Light White Color Obstacle Light This High-intensity Type B Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle that exceed 150 meters in height. Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Self-designed reflection board ensure less LED could emitting brighter light. Compliance ** ICAO Annex

This LED Low-intensity Double Solar Aviation Obstruction light is adopting high efficient mono crystalline silicon solar panel, cooperate with solar dedicated lithium ion battery as power supply. Save your power and better design for you. There are two lamps on the battery box, one is main lamp, another is standby. When main lamp fail, standby light turn on automatically. 3/4inch thread hole under base is very suitable for pole mounting. Better protection and easy installatio

Low-intensity L810 Single Aviation Obstruction Light for High Chimney Single Aviation Obstruction Light Aviation light compliant with ICAO,FAA,CAAC. HOT SALE! Promotion! Datasheet: AH-LI-B Low-intensity L810 Single Aviation Obstruc... Applications This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle

Red Flashing Low-intensity L810 Double Aviation Obstruction Light Compliances FAA AC 150/5345-43 (current edition) Engineering Brief 67D ETL Certified ICAO (Annex 14 - Fourth Edition, July 2004) Product Application This Low-intensity light is a steady burning aviation obstruction light,this fixture is used to mark any obstacle that may present hazards to aircraft navigation. Product Descripton SPECIFICATIONS AH-LI/B Low-intensity Single Aviation Obstruction Light Light

AH-LI-B2 Low-intensity L810 Single Aviation Obstruction Light This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low FAA L-810 Features Electrical 3 high power CREE LED, make sure LED keep bright while use LED power supply board includes short circuit and open circuit protection, Line surge protection by metal

Double Led Aviation Obstruction Light for High Structures and Towers Applications This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle object is higher than 45m, this series of products can be used with Medium-intensity or high-intensity obstruction light to potentially hazardous obstructions to air

Dual LED Aircraft Obstruction Lights , LED Aircraft Warning Lights For Buildings Type A/B This Medium-intensity Dual Light flashing red color at night and white color at daytime, designed for marking top of obstacle which height is between 45 to 150 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Product Description 1. Product Name: Aviation Obstruction Light 2. Mode: AH-MI/H 3. Standard: ICAO

AH-HI-A0 LED High-intensity Type A Aviation Obstruction Light Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 High Intensity Type A Obstruction Light FAA L-856, L-857 Features Electrical CREE ultra high intensity LED as light source saving power Physical Unique design and UV protected polycarbonate lens for converging light and saving LED power UV protection Powder coated bright yellow color base make better visibility System design Built-in photocell for

AC220V LED Aviation Obstruction Light For Large - Scale Port Machinery Product Application -High-rise Building -High Chimney -Marking towers (Telecom, GSM, Microwave & TV) -High Pole -Tower Crane -Wind Tubinebridge -Large-scale port machinery -Large engineer machinery and wind turbines. Packaging & Delivery Packaging: Plastic bag with paper carton. Delivery: In 2-30 days after payment. After-sales service 1. 2 years full warranty, 5 years maintenance since the purchasing date

Low-intensity Solar Powered Aviation Obstruction Light System compliant with ICAO,FAA,CAAC Applications Scope of Application AH-LS-A1 Low-intensity Solar Powered Aviation Obstruction Light System can be provided with power supply without power transmission cables by solar power, so it is suitable for those locations, Electric Tower, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc especially which are

This LED Marine Lanterns is completely self-contained lantern. Four (4) solar panels are integrated into the assembly and mounted to collect sunlight at all angles. CREE Ultra high intensity LED is used as light source which make performance better. There is no need to open the light, the light flashing characteristics(IALA 256 flashes) could be remote controlled by IR Programmer easily Electrical Based on LED technology, and its color complies to IALA Recommendations E-200-1

Aviation Obstruction Light Controller, Stainless Steel 304 Body Material This Controller is designed for outside use, it could monitoring all aviation obstruction lights connected with and output dry contact to CRM/IBMS control room. Best convenient for work performance Advantages: Input power: 220VAC, Output power: 220VAC (Others are available if request) Enclosure is made of corrosion resistance and wind resistance stainless steel 304(SS316 is optional) Surge protection,

PC Lamp Body Material and IP65 IP Rating Obstruction lights AH-LI/B >10cd Advantages1. PC material with good impact protection strength, thermal stability, high transmittance.2. Bird spike against bird drop.3. International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100000hours.4. LED based on obstruction light last 15 times longer than traditional light source, incandescent light.5. About 96% less power than 116W