LED Aviation Obstruction Light

This solar Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Main-standby mode ensure the obstacle is always marked even one light fail. There is no need for external power input. The vertical degree of the solar panel is adjustable to ensure it could get the most sunlight in different area. Compliance l ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A /

Low-intensity L810 Single Aviation Obstruction Light AH-LI-B2 This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance l ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B / E Obstacle Light l FAA L-810 l CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013 Aerodrome technical standards Features Electrical l 3 high power CREE LED, make

Brightness Double LED Obstruction Light Long Life And Low Energy Consumption Features Stainless steel baked with the lacquer base. Special LED chips, with brightness, low energy consumption and long life. PC material cover, provides strong corrosion resistance, UV resistance, impact resistance. With lightning protection ability and control circuit with anti surge protective device that can apply to poor working environment. With light-operated switch. When under the condition

Heat Resistant Medium Intensity Obstruction Light / Tower Warning Lights Key features 1. Lamp shade of the light adopts PC which is quite high impact resistance, hot resistance, high efficiency light transmission up to 90%, anti-UV, aging resistance, ignitability rate UL-94V0. 2. House of the light is made of die casting aluminum and painted by spraying plastics finish. It is light, good ability of heat release, waterproof, impact resistance, anticorrosion etc.. 3. Light

This High-intensity Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle that exceed 150 meters in height. Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Self-designed reflection board ensure less LED could emitting brighter light. Electrical CREE ultra high intensity LED as light source saving power Power supply available in DC(48V) or AC(110V, 240V) Physical

LED High-intensity Type A Aviation Obstruction Light This High-intensity Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle that exceed 150 meters in height. Compliance ICAO Annex 14 Volume 1, Eight edition, 2018, table 6.3 High Intensity Type A Obstruction Light CAAC MH6012-2015 Aviation obstruction light, MH 5001-2013 Aerodrome technical standards Features Electrical CREE ultra-high intensity LED as light source saving power

AH-HI-A1(L) LED High-intensity Type A White Aviation Obstruction Light with 3 Operation Modes Product Overview The LED Aviation Obstruction Light is a highly reliable and efficient Air Traffic Safety Light designed to enhance visibility of structures posing potential hazards to aircraft. Utilizing advanced CREE High Intensity LED technology, this Obstacle Marking Light delivers exceptional brightness and long-lasting performance, ensuring safe airspace around towers,

White High-intensity Type A LED Aviation Obstruction Light for Tele Tower Specification • The house of the light adopts Aluminium alloy, Lens of Tempered glass; the structure is high strength,resistance to corrosion• Use the optical design of parabolic reflector, the visual range further and angle more accurate.• Light source adopts high quality LED which are light efficiency 100LM/W, low power consumption, longlifespan up to flash 100,000 Hrs• Based on the single chip

This LED Low-intensity Double light is a steady burning (20/30/60fpm is adjustable) aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Main-standby mode ensure the obstacle is always marked even one light fail. Compliance l ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B /E Obstruction Light l FAA L-810 Features Electrical l CREE LED, make sure LED keep bright while use for long time l

LED Aviation Obstruction Light red fixed light aircraft warning light 32.5cd FAA L-810 tower warning light This Low-intensity aircraft warning light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance l ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6-1, table 6-2 Low Intensity Type A / B / E Obstruction Light l FAA L-810 Features Electrical l 3 high power CREE LED, make sure LED keep

High Building Aviation Warning Lights ICAO 20000cd LED L865 Built In Photocell Product advantages: This Medium-intensity Type A Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle which height is between 105 to 150 meters. Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Product Standred: ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Medium Intensity Type

High Chimney Led Aircraft Warning Lights ICAO Aviation Obstruction Lamp FAA L865 20000cd This Medium-intensity Type A&B Aviation Obstruction Light flashing white color at daytime and red color at night. It’s designed for marking top of obstacle which height is between 45 to 150 meters.Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Medium

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light ** FAA L-810 ** LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light ** Power supply available in DC(12-48VDC) or AC(110-240VAC) Physical  Bird deterrent spike

Tower Top Medium Intensity LED Aviation Obstruction Light Type B This LED Medium-intensity light can be used alone on the top of the high-rise building, high chimney, Telecom tower etc whose height is >105m. It flash white color(2000cd±25%) at night and turn to 20000cd±25% at daytime. Two operation modes change auotmatically due to photocell built-in light. Product Description SPECIFICATIONS AH-MI/E Medium-intensity Type B Aviation Obstruction Light Light Characteristics

ICAO High Intensity LED Aviation Obstruction Light 200000cd / 20000cd / 2000cd White Color This High intensity Aviation Obstruction Light is a new generation that is environmental-friendly and has super long life expectancy, which consisted of fresnel lens, a lamp holder, a Microcomputer Controller, high intensity LED and photo-sensor system. Product Descripton Description Parameter Standard ICAO (Aerodromes Annex 14) High-intensity Type A ,FAA L-856 Vertical angle 120° Light

IP67 Medium Intensity LED Aviation Obstruction Light For High Construction Medium light intensity aviation obstruction lights flash red, alone in the building higher than 105 meters and less than 150 meters or longer fit for use with low light intensity. When a building higher than 105 m can be used with the A-type medium light intensity aviation obstruction or high light intensity aviation obstruction light used together, play together aviation obstacle warning. Product

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B / E Obstacle Light FAA L-810 CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013 Aerodrome technical standards Electrical 3 high power CREE LED, make sure LED keep bright while use Power supply in DC(48V)& AC(110-240VAC), the light

Tower Crane Flash Obstruction Light 2000cd Medium Intensity Aviation Lamp FAA L865 This AH-MI-A2 Medium-intensity Type A Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle which height is between 105 to 150 meters. Aircraft flight warning effect. Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Product Overview: ** ICAO Annex 14 Volume 1, Sixth edition, 2013,

This LED Medium-intensity light can be used alone on the top of the high-rise building, high chimney, Telecom tower etc whose height is between 45m and 105m. Compliance ** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Medium Intensity Obstruction Light ** FAA L-864 Electrical * LED as light source saving power consumption and maintenance,95% less power than equivalent incandescent light * Power supply available in DC(12-48VDC) or AC(110-240VAC) Physical  Bird

Low Intensity LED Aeronautical Obstruction Light L810 AH-LS/T Red Emitting Color Product Description 1. Product Name: Aviation Obstruction Light 2. Mode: AH-MS/S 3. Standard:ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B,FAA L-810 4. Light intensity:≥10cd(Steady-burning);≥32.5cd(Flashing mode) 5. Working mode: Steady-burning mode or Flashing mode(20-60times/minute) 6. Light source: LED 7. Service life of LED: ≥100,000hours 8. Operating voltage: DC 6.4V (Solar