NC Hydraulic Shearing Machine , Guillotine Type Steel Plate Shearing Machine
NC Hydraulic Shearing Machine , Guillotine Type Steel Plate Shearing Machine
1. Technical parameters
| Model | Unit | QC11Y-16×3200 | |
| Maximum shearing thickness | mm | 16 | |
| Maximum shearing width | mm | 3200 | |
| Sheared steel sheet strength | N/mm2 | 450 | |
| Shearing angle | ° | 0.5-2.5 | |
| Strokes | min-1 | 12-20 | |
| Blade length | mm | 3300 | |
| Distance between uprights | mm | 3430 | |
| Back gauge range | mm | 20-800 | |
| Main motor power | KW | 22 | |
| Gear pump | Model | / | CP1-50-P-10R |
| Flow | ml/r | 50 | |
| Pressure | Mpa | 31.5 | |
2. The device structure and character
● This device main used to cut mild carbon steel sheet with the thickness range from 3mm to 16mm, and the width less than 3200mm, when the steel strength not more than 450N/mm2. So if want to use the device to cut the plate sheet with the higher strength more than 450N/mm2, the cut thickness will be thin than normal.
● Adopts integrated hydraulic system, with good reliability.
● Adopts three points roll guides, to release clearance between guides, higher cut quality.
● Back gauge used intelligence display installation, auto count shear number, back gauge can adjustable by client’s requirement.
● Installed a hand wheel on the front of device, rotate it to adjust cutting edge clearance, client should to adjust it by different thickness.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.