ZL-930/MCL930 mini articulated wheel loader 3200mm Dumping Height 1.5T loading capacity
ZL-930/MCL930 mini articulated wheel loader 3200mm Dumping Height 1.5T loading capacity
1.1 Products Description
1.After the rise of force ,high discharge auomatic flat working device,short operation time,improve the work efficiency.
2.Hydraulic brake system gas cap,caliper disc brake;
3.This split torque converter,not high temperature,easy to repair;
4.I raked front frame,unloading distance ,lifting weight;
5.Automatic power-off electronic flameout ,no knife;
6.Pilot valve hydraulic operation ,with air conditioner.
1.2 Configuration
1.Wider off-road tire
2.Palnetary gear axle
3.Larger approach angle and departure angle
4.Swing rear axle
5.Compact size
1.3 Shipping
The inspection is as important as any other procedure. Our technicians usually need to inspect the following parts:
-
Adjust the tyre pressure, drive the loader to the inspection platform, to see if the bucket is level to the ground when it is on the ground
-
Check if the hydraulic oil is enough, and then lift the arm, withdraw the bucket and check the hydraulic oil level again, check the hydaulic oil tank scale (scale at 11 to 13 means enough)
-
Check if any bolts are loose or missing, and if there is a oil leaking problem
-
Check the track width to see if it is different from standard
-
the meters reading on dash board inside the cab. Including brake pump pressure: 0.4-0.8; lub oil pressure: 0.2-0.6; water temperature: check if it is too high after the testing; torque converter pressure: 2.2-2.4 (at full load and step heavily on the accelerate pedal.
-
Check if head light, tail light, on and off switch of different functions, and radio operating normally, if electric wires are exposed
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.