Demulsifier Demulsification Agent For Crude Tank Bottoms And Desalter Effluent
Demulsifier for Crude Tank Bottoms and Desalter Effluent
Bluwat demulsifier helps facilities process crude storage tank bottoms and desalter effluent by breaking stable emulsions and accelerating oil water separation. The result is cleaner water, lower oil loss, and more stable downstream treatment.
Product Introduction
The high charge cationic polymer disrupts emulsion stability, binds fine oil droplets and solids into dense flocs, and improves removal by gravity settling or flotation. It is fully water soluble and fits easily into existing mixing steps.
Key Advantages
- Clear oil water split for high salt and variable crude blends
- Low dosage with consistent results
- Wide pH window with best near 9
- Works with PAC and PAM for final polishing
- Helps protect membranes and biological treatment
Application Industries
- Crude storage terminals and tank farms
- Desalter and dehydration units
- Slop oil and interface stream handling
- Refinery and upstream transfer points
Operating Guide
- Jar test to define dose range
- Adjust pH close to 9 when feasible
- Inject demulsifier in the mixing zone before separation
- Remove separated oil and flocs by settling or DAF
Dose range 50 to 1000 ppm depending on crude and solids content.
Technical Specifications
| Item | Specification |
|---|---|
| Appearance | Yellow liquid |
| Active content | at least 40 percent |
| Product pH | 2 to 4 |
| Recommended pH of use | 5 to 12 best near 9 |
| Typical dosage | 50 to 1000 ppm |
Packaging and Storage
- 200 L plastic drums
- 1000 L IBC tanks
- Store in a cool and dry warehouse
- Shelf life up to 12 months
Why Choose Bluwat Chemicals
Bluwat offers dependable product quality and field support for tank bottom and desalter applications. Our team helps you reduce chemical cost, protect equipment, and meet discharge or reuse goals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.