De-Emulsifier Cutting Fluid Emulsion Breaker For Machining Wastewater For Metal Finishing And Grinding Lines
Cutting Fluid Emulsion Breaker for Machining Wastewater
Bluwat emulsion breaker rapidly splits stable emulsions from cutting and grinding processes. It is water soluble, easy to dose, and works across a wide pH range to deliver clear oil water separation.
Product Introduction
The cationic polymer reduces interfacial tension in W O and O W systems, breaks the stability of oil and colloids, and forms dense flocs through molecular chain bridging. It integrates well with equalization tanks and dissolved air flotation units.
Key Advantages
- Fast emulsion break for synthetic and semi synthetic coolants
- Low dosage by jar test with predictable performance
- Wide pH window with best near 9
- Synergy with PAC and PAM for final polishing
- Simple setup using existing mixing tanks and pumps
Application Industries
- Machining centers and CNC plants
- Hardware and automotive parts manufacturing
- Metal finishing and grinding lines
- Central coolant system wastewater
Operating Guide
- Run jar tests to decide the dose
- Adjust pH near 9 when feasible
- Dose neat or diluted solution in the mixing tank
- Separate by gravity or dissolved air flotation
Typical dose 50 to 1000 ppm depending on oil and solids loading.
Technical Specifications
| Item | Specification |
|---|---|
| Appearance | Yellow liquid |
| Active content | at least 40 percent |
| Product pH | 2 to 4 |
| Recommended pH of use | 5 to 12 best near 9 |
| Typical dosage | 50 to 1000 ppm |
Packaging and Storage
- 200 L plastic drums or 1000 L IBC tanks
- Store sealed in a cool and dry place
- Shelf life up to 12 months
Why Choose Bluwat Chemicals
We provide reliable demulsification programs for machining wastewater with consistent quality and hands on technical support to help you meet discharge or reuse goals at the lowest total cost.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.