Wastewater Chemical Demulsifier For High Organics Resins And Coatings Plants Adhesives And Auxiliaries Production
Chemical Wastewater Demulsifier for High Organics
This demulsifier targets mixed organic loads from resin, coating, and adhesive production. It reduces interfacial tension, destabilizes emulsions, and forms dense flocs that separate by gravity or dissolved air flotation.
Product Introduction
The cationic polymer delivers strong charge neutralization and molecular chain bridging. It converts finely dispersed oil and colloids into larger flocs, improving clarification efficiency and lowering the load on biological steps.
Key Advantages
- Fast split of mixed organic emulsions
- Stable performance from pH 5 to 12 with best near 9
- Low dosage with predictable results by jar test
- Compatible with PAC and PAM for final polishing
- Improves sludge dewatering and reduces operating cost
Application Industries
- Resins and coatings plants
- Adhesives and auxiliaries production
- Fine chemical manufacturing
- General chemical processing wastewater
Operating Guide
- Run jar tests on representative wastewater
- Adjust pH near 9 when feasible
- Dose neat or diluted solution into a mixing tank
- Separate by gravity settler or dissolved air flotation
Dosage should be optimized according to wastewater quality.
Technical Specifications
| Item | Specification |
|---|---|
| Appearance | Yellow to Brown liquid |
| Active content | at least 40 percent |
| Product pH | 2 to 4 |
| Recommended pH of use | 5 to 12 best near 9 |
| Typical dosage | 50 to 1000 ppm |
Packaging and Storage
- 200 L plastic drums
- 1000 L IBC tanks
- Store sealed in a cool and dry place
- Shelf life up to 12 months
Why Choose Bluwat Chemicals
Bluwat provides reliable demulsification programs for chemical wastewater. The product helps achieve clear effluent, lower COD, and stable downstream operation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.