Surfactant Production Wastewater Emulsion Breaker For Cleaning And Detergent Formulation Plants
Surfactant Production Wastewater Emulsion Breaker
This product is designed for wastewater from surfactant and auxiliaries lines where emulsions are highly stable. It reduces interfacial tension and binds fine oil droplets into strong flocs for rapid separation.
Product Introduction
The cationic polymer provides strong charge neutralization and molecular bridging. It converts dispersed oil and colloids into larger, settleable flocs, improving clarity and reducing the load on membranes and biological systems.
Key Advantages
- Fast action on surfactant rich emulsions
- Effective from pH 5 to 12 with best near 9
- Low dosage with stable results
- Works well with PAC and PAM to meet tight limits
- Improves sludge dewatering performance
Application Industries
- Surfactants and auxiliaries production
- Cleaning and detergent formulation plants
- Emulsion polymer and latex processing
- General chemical manufacturing wastewater
Operating Guide
- Conduct jar tests to define the target dose
- Adjust pH near 9 when feasible
- Dose neat or diluted solution into a mixing tank
- Separate by gravity or dissolved air flotation
Dosage should be optimized according to wastewater characteristics.
Technical Specifications
| Item | Specification |
|---|---|
| Appearance | Yellow to Brown Liquid |
| Active content | at least 40 percent |
| Product pH | 2 to 4 |
| Recommended pH of use | 5 to 12 best near 9 |
| Typical dosage | 50 to 1000 ppm |
Packaging and Storage
- 200 L plastic drums
- 1000 L IBC tanks
- Store indoors in original containers
- Shelf life up to 12 months
Why Choose Bluwat Chemicals
The solution helps plants achieve clear effluent and stable operation while controlling total cost. It is suitable for integration with existing mixing and separation units.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.