Water Treatment Polymer Flocculating Agent , Oilfield Drilling Fluid Lubricant
Blufloc PHPA A-6518 Description:
- PHPA is a simple name for Partially hydrolyzed Polyacrylamide.
- As a leading manufacturer in China, we are exporting our Polyacrylamide to international markets for over 10 years.
- PHPA A-6518 grade (APAM) is a water-soluble polymer formed from acrylamide (a compound with the molecular formula C3H5NO) subunits.
- Anionic Polyacrylamide has a big range of high molecular weights from 5-25 million, with an anionic charge density ranging from 10-60%.
- It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage the flocculation of particles present in water.
- For the oil drilling field, it is mainly used together in Bentonite mud, as the additive, and mixed with Polyanionic Cellulose, Bentonite, etc.
- A leading manufacturer in China for Polyacrylamide over 10 years.
Blufloc PHPA A-6518 Specifications:
Appearance: | Off-White Granular Powder | |
Ionic Charge: | Anionic | |
Particle Size: | 20-100 mesh | |
Molecular Weight: | High | |
Hydrolysis Degree: | Medium | |
Solid Content: | 89% Min | |
Approximate Brookfield viscosity at 25° C: | @ 1.0% | >1500 |
@ 0.50% | >600 | |
@ 0.25% | >300 | |
Bulk Density: | About 0.6-0.8 | |
Specific Gravity at 25°C: | 1.01-1.1 | |
Recommended Working Concentration: | 0.1-0.5% | |
PH (1% aqua solution): | 6-9 | |
Storage Temperature (°C): | 0 - 35 | |
Shelf Life: | 2 years | |
Blufloc A-6518 Application Fields:
Drilling mud additive for oilfield
Fluid loss control
Lubrication
Shale stabilization
- Mining
- Soil Stabilization
Blufloc PHPA A-6518 Competitive Advantage:
| 1 | High Molecular weight with High charge degree polymer |
2 | Economical to use - lower dosage levels. |
3 | Easily soluble in water; dissolves rapidly. |
4 | Noncorrosive of suggested dosage, economical, and effective at low levels. |
5 | Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
6 | Reduction in the sludge of the dewatering process system. |
7 | Faster sedimentation, better flocculation. |
8 | Non-pollution (no aluminum, chlorine, heavy metal ions, etc.). |
9 | 10 years of manufacturing experience, with more than 20 technical engineers |
Application Methods:
1 | Dissolving | Polyacrylamide (polyelectrolyte/flocculant) should be standardly dissolved to 0.1-0.5% concentration. |
2 | Dissolving | The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. |
3 | Agitation | The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be 1HP for a 1-2m3 mixing tank. |
4 | Application | The dosage range varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage. |
5 | Jar Test: | Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60 rpm. Determine the flocs properly at this time and note the sedimentation and clarity of the top solution. |
Blufloc A-6518 Package and Storage:
- Packed in Kraft or PE bags with inner plastic bags, with each bag containing 15,25kgs, or 750kgs net big bag.
- Stored in original packaging in a cool and dry place, away from sources of heat, flame, and direct sunlight.
Blufloc A-6518 Anionic Polyacrylamide Picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.