Polymeric Ferric Aluminum Sulfate is a high-efficiency inorganic coagulant specifically formulated for automobile manufacturing wastewater treatment and various industrial water purification applications.

• Rapid flocculation with large floc formation and fast sedimentation
• Effective across wide pH range (4-11) for various wastewater types
• Reduced chemical consumption with cost-effective operation
• Excellent removal of COD, BOD, phosphorus, and heavy metals
• Minimal corrosion on treatment facilities
• Safe for human health with no residual aluminum or harmful substances

• Automobile manufacturing wastewater treatment
• Paper making and printing wastewater purification
• Municipal sewage treatment and sludge conditioning
• Industrial circulating water systems and boiler feed water
• Mining water clarification and oil wastewater treatment

• Dissolve in 20-50% concentration using corrosion-resistant equipment
• Dosage equivalent to polyaluminum chloride, 1/3-1/4 of solid aluminum sulfate
• Use prepared solution immediately with pure tap water

• Coagulation: Rapid mixing (250-300r/min for 10-30 seconds)
• Flocculation: Gentle mixing (150r/min for 6 min, then 60r/min for 4 min)
• Sedimentation: Slow mixing (20-30r/min for 5 min) followed by 10-minute settling

• 25kg bags or 1200kg ton-bags on pallets
• Store in dry conditions below 80°C, protected from moisture