High-efficiency anionic polyacrylamide flocculant polymer specifically designed for sand washing water treatment applications. This high molecular weight polymer accelerates separation processes in wastewater treatment systems.

• High molecular weight (17-20 million) for superior flocculation performance
• Anionic charge with 20-40% hydrolysis degree for optimal particle aggregation
• Solid content exceeding 89% for concentrated effectiveness
• Acrylamide residual content less than 500ppm for safety compliance
• 2-year shelf life when stored properly in cool, dry conditions
• OEM customization available with your brand name on packaging

Place effluent sample in beaker, add flocculant as designated, agitate for 1 minute at 100-120 rpm, then slowly agitate at 60 rpm. Observe floc formation, sedimentation, and solution clarity.

• Dissolving Time: Approximately 1 hour with continuous agitation
• Agitation Speed: 200-400 rpm recommended
• Dissolving Concentration: 0.1-0.5% standard

Wear appropriate PPE including splash goggles, lab coats, vapor respirators, gloves, and boots. Immediately wash skin splashes with water. For eye contact, flush with fresh water and seek medical attention. Refer to MSDS for complete safety information.

• 25kg paper bags on pallets (18-20 tons per 20' container)
• 750kg bulk bags (15 tons FCL)
• Store in original packaging in cool, dry location
• 2-year shelf life under proper storage conditions