30% PAC Poly Aluminium Chloride Water Treatment Chemical - 29% Al2O3, 45-85% Basicity Flocculant

30% PAC Poly Aluminium Chloride is an advanced inorganic polymer flocculant designed for efficient water treatment applications. This chemical coagulant effectively removes suspended particles and colloidal impurities through multiple mechanisms including double layer compression, charge neutralization, adsorption bridging, and sedimentation.

• Spray dryer type formulation for consistent performance
• Suitable for both drinking water and wastewater treatment
• Yellow solid powder appearance
• Al2O3 content: 29% minimum
• Basicity range: 45-85%

• Superior purification of low-temperature, low-turbidity, and heavily organic-polluted raw water
• Cost reduction of 20%-80% compared to other flocculants
• Rapid floc formation and precipitation, especially at low temperatures
• Lower dosage requirements for improved water quality
• Wide temperature adaptability for year-round performance
• Compatible with automatic dosing systems
• Broad pH range operation (5-9) with reduced post-treatment pH and basicity

Users should determine optimal concentration through testing. Products should be dissolved and diluted before application.

• Liquid product: 5-50%
• Solid product: 2-20%

• Liquid product: 3-40kg per 1000 tons of water
• Solid product: 1-15kg per 1000 tons of water

25kg PP woven bags with inner plastic lining. Store sealed in dry, ventilated areas protected from rain, high temperatures, and direct sunlight. Product shelf life: 24 months.