Spray Drying 30% PAC Poly Aluminium Chloride is an advanced inorganic polymer flocculant engineered for superior water purification and paper mill applications. This high-performance coagulant effectively removes suspended particles and colloidal impurities through multiple mechanisms including double layer compression, charge neutralization, adsorption bridging, and sedimentation trapping.

• Spray dryer production method ensuring consistent quality
• Certified for both drinking water and wastewater treatment
• Distinctive yellow powder appearance
• High Al2O3 content of 29% minimum
• Wide basicity range of 45-85%

• Superior purification of low-temperature, low-turbidity, and heavily organic-polluted water sources
• Cost reduction of 20-80% compared to conventional flocculants
• Rapid floc formation and precipitation, even at low temperatures
• Lower dosage requirements for improved water quality
• Wide pH adaptability range (5-9) with reduced post-treatment alkalinity

Optimal dosing should be determined through coagulation testing based on specific water conditions:

• Liquid product dilution: 5-50% concentration
• Solid product dilution: 2-20% concentration
• Liquid dosage range: 3-40kg per 1000 tons of water
• Solid dosage range: 1-15kg per 1000 tons of water

Packaged in 25kg PP woven bags with inner plastic lining. Store sealed in dry, ventilated areas protected from rain, high temperatures, and direct sunlight. Product shelf life: 24 months.