Food Industry Processing 55295 98 2 Water Decoloring Agent
Food Industry Processing Wastewater Treatment Chemicals BWD water decoloring agent
Description:
- This chemical can be used to treat food industry processing wastewater. BWD-01 water decoloring agent was launch in '90s, had been developed by BLUWAT with 20 years, stable quality, it is a new type of high-performance decolorizing flocculant, high performance in de-coloring, flocculating, CODcr decreasing and other applications used to remove the color of wastewater generated by textiles process houses and dyes industries and other fields.
- It has high color removal of dye wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.
- The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water-scarce areas, it comes as heaven-sent facilitating recycling of the industrial effluent into process water. BWD-01 Water Decoloring Agent is used to solve this problem.
- wastewater treatment in paint industry, industrial wastewater treatment, flocculation water treatment, water clarifying agent, water purifying agents, decolouring agent, cationic polymers water treatment.
Specifications:
|
Appearance: |
Colorless Liquid |
|
Solid Content: |
50%min |
|
Viscosity(25°C, cps): |
50-300 |
|
PH Value (30% Water Solution): |
3-6 |
|
Specific Gravity (at 20°C): |
1.1-1.3 |
|
Water Solubility: |
Completely Soluble With Water at Any Rate |
|
Package: |
30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
|
Storage Temperature: |
Room temperature |
Competitive Advantage:
|
1 |
High performance treating high-coloring effluent from textile dyeing mills, pigment mills, printing ink and paper mils. |
|
2 |
As flocculant to de-color high-colority effluent from dyestuffs processing plants. |
|
3 |
Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
|
4 |
Can ben used as retention agent in the paper & pulp processing |
|
5 |
Faster sedimentation, better flocculation. |
|
6 |
Non-pollution (no aluminum, chlorine, heavy metal ions etc.). |
|
7 |
It can be used before or after biological treatment. |
|
8 |
Less sludge produced than other inorganic coagulants. |
Application Methods:
|
1 |
Before use, to make BWD-01 with fresh water 40-50times, to have 2-2.5% concentration solution. |
|
2 |
Make PAC solution with 2-5% Al2O3 content. |
|
3 |
Make solution of Anionic flocculant with 0.1% concentration. |
|
4 |
It is very important, to adjust the effluent pH value to 8-10, higher or lower pH, BWD-01 works not well. |
|
5 |
Add PAC solution, mix with effluent completely. about 1-3 minutes |
|
6 |
Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
|
7 |
Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is suggestion) |
|
8 |
Sedimentation |
|
9 |
Check color for treated effluent |
|
10 |
Adjust dosage of BWD-01 and PAC to do more test to have better testing result. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.