Turbo Type GPC10 Pilot Armature Plunger For Pulse Valve Assembly Replacement
Turbo Type GPC10 Pilot Armature Plunger For Pulse Valve Assembly Replacement
This is GPC10 solenoid armature for Turbo Pulse Jet Valve FP20, FP25, DP20, DP25, EP25, SQP20, SQP25, FDP20, FDP25, FP40, DP40, EP40, FP50, FP55, SQP50, SQP55, SQP60, SQP65, FP65, SQP75.
Electromagnetic pulse valve, also called diaphragm valve acts as a "switch" for compressed air in the dust clean blowing system for pulse bag filters. It is controlled by the electric signals from the pulse-jet control device. This system cleans the filter bags cluster by cluster with high-pressure blowing to keep the pressure resistance of the baghouse within a pre-set range, and thus ensure the processing capability and the dust-collecting efficiency of the baghouse.
Dimension & Data of Armature, Coil for Turbo Pulse Valve:
|
BRANDO Model
|
BAPC210029002
|
|
Ordeirng Code
|
GPC 10
|
|
Plunger Tube Material
|
Stainless Steel
|
|
Seal Material
|
NBR, VITON
|
|
BRANDO Model
|
BB10230001
|
|
Ordering Code
|
BH10
|
|
Voltage
|
24VDC, 110VAC, 220VAC
(50/60Hz)
|
|
Power
|
10VA, 19VA, 6W, 15W
|
|
Connector
|
DIN 43650 Form A
|
|
Insulation Class
|
F, H
|
Video of Solenoid Armature For Turbo Pulse Valve:
BRANDO Solenoid Valve Armature Production Video:
More Turbo Type Pulse Jet Valve for you to choose:
 |
 |
 |
| Threaded Type | Submerged Type | Valve Diaphragm |
 |
 |
 |
| Solenoid Coil | Solenoid Armature | Pulse Controller |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.