Manufactured By Numerical Control Technology,Silvery White Flange Solenoid Stem

Product characteristics

1.Consist of Three Parts,Upper male thread connection,armature tube and flange seat.We use laser solder technology and three parts are joined together

2.Use solid stainless steel-430FR or SS304,improve the conductivity largely

3.2/2 way normally closed plunger tube assembly.The most common type of solenoid stem

4.Small size,therefore,can be easy assembled and dis-assembled even in the most narrow place.Application for device that the installation place is narrow.

5.Small Movable core with embed viton to seal the solenoid coil(After assembing)

Viton advantages:Excellent heat resistance, oxidation resistance, oil resistance, corrosion resistance and atmospheric aging resistance, has been widely used in aerospace, aviation, automotive, petroleum and household electrical appliances and other fields, is an irreplaceable key material in the national defense industry.

6.Little spring and little air exhausted vent operated in movable core

7.Mainly used for pneumatic solenoid valve and other pneumatic series

 Item Parameter

Application (Solenoid valve)

Failure recovery guideness

1.The solenoid valve does not work after power on. Check whether power wiring is bad, re wiring and connector connection.

2.Check whether the supply voltage is within the range of + - to normal location.

3. Solenoid valve can not be closed. Seal of movable core or iron core has been damaged. Replace the seal.

4.Other cases: Check Internal leakage situation, whether the seal is damaged, and whether the spring is assembled badly.

Leakage: connect loosening or seal is broken. Tighten screws or replace seals.

There is noise when power is switched on, and the fastener on the head is loose and tightened.

Do OEM with your drawing or sample

Pneumatic solenoid valve image