220V AC 1/8'' 4V130C-06 Flow Control Solenoid Valve In Pneumatic System For Automation Equipment

The combination of 4V pneumatic solenoid valves and cylinders is the basis for the operation of automated equipment, one is the control element and the other is the actuator.They are important parts of the machine to perform autonomous operations.They are well used in pneumatic control system in automatic packaging machinery.

Pneumatic control system is mainly composed of air source processor, 4v pneumatic solenoid valve, one-way throttle valve, cylinder and various pneumatic joints and pipelines. The cylinder speed is adjusted by one-way throttle valve, and the outlet cylinder is equipped with magnetic switch. Since other large-bore cylinders do not have a magnetic switch installed, each mechanism has a proximity switch at the starting position, which can send a signal to execute the next action through the program, and automatically complete the whole process of the whole machine.

Technical information chart of 4V130-06 Solenoid Valve Pneumatic control element:

Product split diagram of 4V130C-06 Double solenoid valve in pneumatic system:

Schematic of each components of 4V130C-06 pneumatic flow directional control valve:

Production view of 4V pneumatic air control valve double solenoid control actuator:

Automatic packaging machine using 4V130-06 5/3 way pneumtic cylinder valve:

Automation in the packaging machinery industry is changing the way in which the packaging process works and the processing methods for packaging containers and materials. A complete automatic packaging machine consists of many components, of which the arm end operating tool, the material handling device and the identification and verification system are the main components. The working principle of each part is as follows: The arm end operating tool, the end manipulator, is a component used to grab product, directional movement and feel performance parameters. Their structural solutions range from single-type vacuum sleeves to series vacuum sleeves or arrays of clamping jaws. In packaging applications, end-operators are usually designed for direct use of vacuum sleeves, clamping jaws or two. The combination of the types. These include power transmission belts, monorail cranes, automatic guided vehicles and robots. In the packaging process, the following factors need to be considered for the handling of the material: product shape, weight and material properties; speed, distance and direction of the product during transportation, wrapping and loading; the level of control required to connect with other devices and Allows for re-formation of the maneuverability of the component if needed.

A typical visual bar code detection capability confirms that each bar code corresponds to each product, so the bar code scanner and video recognition system record and verify the product label to ensure the integrity of the identification.

It can be seen from the main components of the automatic packaging machine and the working principle of each part that the automatic packaging production line combines the automatic packaging machine, auxiliary equipment and conveying device according to the product packaging process in a certain order, and then with corresponding detection, It consists of control, automatic adjustment of compensation devices, and so on. The packaged articles are continuously fed from one end, the packaging materials are added at the corresponding stations, the articles are processed through the various processes in the order of the process flow, and the products are output from the other end, so that the articles are automatically conveyed and packaged without manual intervention and procession.

Welcome to your inquiry!