CP1/4 Mecair Type Dust Collector Pulse Jet Solenoid Valve Armature Plunger
CP1/4 Mecair Dust Collector Pulse Jet Solenoid Valve Armature Plunger
This is CP1/4 solenoid armature for Mecair Pulse Jet Valve VNP206, VNP306, VNP208, VNP308, VNP408, VNP608, VNP708, VNP212, VNP312, VNP412, VNP214, VNP314, VNP414, VNP614, VNP714, VNP216, VNP416, VNP616, VNP716, VNP220, VNP420, VNP424, VNP620, VNP720.
Pulse valves (also called diaphragm valves) are the “switch” for compressed air in the dust clean blowing system of the pulse bag filter. It is used to control the release of air pulses in the cleaning cycle. When the dust collector control board starts the cleaning cycle, it sends an electrical signal to the solenoid valve, and then activates the pulse valve. Inside the pulse valve, the rubber diaphragm opens and closes to release the compressed air stored in the air header. At this time, the air enters the blowing pipe above the filter through the valve, and then enters the filter down to clean the filter bag.
Dimension & Data of Armature, Coil for Mecair Pulse Valve:
|
BRANDO Model
|
BAPC210030051
|
|
Ordeirng Code
|
CP1/4
|
|
Plunger Tube Material
|
Stainless Steel
|
|
Seal Material
|
NBR, VITON
|
|
BRANDO Model
|
BB10230001
|
|
Ordering Code
|
SB3
|
|
Voltage
|
24VDC, 110VAC, 220VAC
(50/60Hz)
|
|
Power
|
10VA, 19VA, 6W, 15W
|
|
Connector
|
DIN 43650 Form A
|
|
Insulation Class
|
F, H
|
Video of Solenoid Armature For Mecair Pulse Valve:
BRANDO Solenoid Valve Armature Production Video:
More Products For Mecair Pulse Valve for you to choose:
 |
 |
 |
 |
| Valve Diaphragm | Solenoid Coil | Solenoid Armature | Pulse Controller |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.