TPE 1 1/2" Solenoid Valve Diaphragm Repair Kit For AE1440B AE1440R AE2440B AE2440R Solenoid Valve

TPE 1 1/2" Solenoid Valve Diaphragm Repair Kit For AE1440B AE1440R AE2440B AE2440R Solenoid Valve

The electromagnetic pulse valve is the "switch" of the air injection circuit of the dust cleaning system of the pulse bag filter, and the diaphragm in the valve body is controlled by the pulse controller to vibrate into the pulse "impulse" on the street for dust cleaning. The area controlled by the back of the diaphragm is larger than that controlled by the front, and the air pressure force is large.

The electric signal is input by the pulse controller, which makes the electromagnetic pilot head attractive and transportable, and opens the unloading hole. The pressure gas controlled by the diaphragm is discharged rapidly. The pressure gas controlled in front of the diaphragm lifts the diaphragm, opens the channel of the electromagnetic pulse valve and blows into the street, the electrical signal disappears, the spring of the electromagnetic pilot head causes the moving column to immediately reset and close the unloading hole, the pressure of the gas controlled in the back of the diaphragm and the spring force cause the diaphragm to close the channel, the electromagnetic pulse valve stops blowing, and the resistance hole on the diaphragm.

Can the electromagnetic pulse valve operate normally and stably? Environmental conditions of the electromagnetic pulse valve:

1. According to the type of power supply, AC and DC solenoid valves are selected respectively

2. In case of high relative humidity and drips in the environment, waterproof solenoid valve shall be selected

3. In corrosive or explosive environment, corrosion resistance shall be selected preferentially according to safety requirements

4. Supply conditions for the solenoid valve

Main dimension of Norgren Type Pulse Valve Diaphragm Kit:

Available Models of Diaphragm Valve Repair Kits For Norgren Pulse Valves:

YouTube video of Norgren Diaphragm Repair Kit For Norgren Pulse Valve:

Factory Production Pictures of Solenoid Valve Diaphragm Kits:

Diaphragm Features:

1. Diaphragm (Rubber or Fabric Reinforcement in Rubber Diaphragms) is a precision functional part used check pressure or change fluid pressure into drive power.

2. Fabric-reinforced in rubber diaphragms utilize a layer of an engineered fabric material as part of the diaphragm comstruction. This layer of fabric give tremendous design flexibity.

3. Fabric is made of polyester, nylon and silk and commonly used for most applications, such like exposed to high-temperature, or require extremely high-strength.

4. Facbric-reinforced diaphragms advantages:
* No leakage * No Lubrication * No Breakaway Force * No Friction
* Functionality Over Wide Pressure Ranges
* High Strength * Low Cost * Simple Design * Versatility

5. EPDM, Viton all available.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!