1020/2 1/4 Inch NC SAE Flare HM3 Refrigeration Solenoid Valve

The valve is the control component in the fluid delivery system. Often responsible for cut-off, regulation, diversion, prevention of reverse flow, voltage regulation, shunt or overflow pressure relief, etc.

According to the purpose and function, it can be roughly divided into the following categories:

1. Cut-off type: mainly used to cut or connect the medium flow. Such as the gate valve, globe valve, ball valve, butterfly valve, solenoid valve.

2. Non-return type: used to prevent the backflow of media. Such as cast iron check valve of various structures.

3. Adjustment type: adjust the pressure and flow of the medium. Such as throttle valve (expansion valve), oil pressure regulator.

4. Safety type: when the medium pressure exceeds the specified value, it is used to discharge excess medium to ensure the safety of the pipeline system and equipment. Such as a safety valve.

5. Distribution type: change the medium flow direction and distribute the medium. Such as a three-way valve, diverter valve, slide valve.

6. Special uses, such as thimble valves, filters, etc.

Technical Data:

Dimension:

Replacement Castel Type Solenoid Coil:

APPLICATION
The solenoid valves illustrated in this chapter are designed for installation on commercial refrigeration systems and on civil and industrial air conditioning plants that use the following refrigerant fluids:
• HCFC (R22)
• HFC (R134a , R404A , R407C , R410A , R507)
• HFO and HFO/HFC mixtures (R1234ze , R448A , R449A, R450A , and R452A)

Furthermore, the same solenoid valves, up to DN 25, that is models 1078*9, 1098/9, 1079/11 and 1099/11, can also be installed on systems using the following refrigeration fluids:
• HFC (R32)
• HFO (R1234yf)

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!