1020/3 3/8'' SAE Flare HM3 Refrigeration System Liquid Line Solenoid Valve

Structural characteristics of the globe valve: According to the flow direction of the fluid in the globe valve, the globe valve can be divided into a DC valve and a right angle valve.

(1) DC valve: The valve body and the stem are at 45°, the fluid resistance is small, and the pressure loss is small, which is convenient for maintenance and replacement.

(2) Right-angle valve: The front and back of the valve body are at 90°, and the flow resistance at the elbow is large.

Technical Data:

Replacement Castel Type Solenoid Coil:

APPLICATION
The solenoid valves illustrated in this chapter are designed for installation on commercial refrigeration systems and on civil and industrial air conditioning plants that use the following refrigerant fluids:
• HCFC (R22)
• HFC (R134a , R404A , R407C , R410A , R507)
• HFO and HFO/HFC mixtures (R1234ze , R448A , R449A, R450A , and R452A)

Furthermore, the same solenoid valves, up to DN 25, that is models 1078*9, 1098/9, 1079/11 and 1099/11, can also be installed on systems using the following refrigeration fluids:
• HFC (R32)
• HFO (R1234yf)

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!