1/2'' 321H35 High Pressure Brass Solenoid Valve 40 Bar 24VDC 220VAC

1/2'' 321H35 High Pressure Brass Solenoid Valve 40 Bar 24VDC 220VAC

Plastic Bottle Blowing Machine Application Example:

Three 2-way solenoid valves permit to control the required blowing functions to produce plastic bottles.

In a first phase, the N.O. valves (322H35) and N.C. valves (421H35) are energised. The pressure in the circuit is therefore established to a pre-determined level (2 to 15 bar). During the same time the 3/2 valve (331B31) maintains the mould closed with a 40 bar pressure.

In a second phase, the N.C. valve 321H35 is energised and the pressure increases up to 40 bar. Independently from the position of the 421H35 valve, the 321H35 valve assures by design that the 40 bar pressure is maintained and cannot go back into the "low pressure" circuit.

In a third phase, the N.O. valve 322H35 is de-energised and permits the discharge of the circuit down to 0 bar.

Technical Data of High Pressure Solenoid Valve:​

Main Dimension of High Pressure Solenoid Valve:

Brando Solenoid Valve Factory Production Video:

More High Pressure Solenoid Valves for you to choose:

Brass Solenoid Valves
MAX 50 bar	MAX 50 bar	MAX 50 bar	MAX 50 bar
MAX 50 bar	MAX 70 bar	MAX 120 bar	MAX 200 bar

Stainless Steel Solenoid Valves
MAX 50 bar	MAX 50 bar	MAX 50 bar	MAX 100 bar
MAX 120 bar	MAX 160 bar	MAX 200 bar	MAX 300 bar

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!