Rechargeable Nano Ion 2 Volt 800Ah OPzS Battery 8OPzS800 Long Life
Rechargeable Nano Ion 2 Volt 800Ah OPzS Battery 8OPzS800 Long Life
Specifications:
| Nominal Voltage | 2V | |
| Nominal Capacity (C20) | 800Ah (1.80V @ 20℃) | |
| Dimension | Length | 191mm |
| Width | 210mm | |
| Height | 645mm | |
| Total Height | 700mm | |
| Weight(With Electrolyte) | Approx. 58kg | |
| Terminal | M8 | |
| Internal Resistance | Full charged@20℃: 0.0006 Ohm | |
| Max Charging Current | 160A | |
Description:
● Designed life for floating charge is 20 years according to IEC60896-11;
● Rubber separator with floating electrolyte technology;
● High strength ABS material for cover and SAN material transparent container;
● Wide temperature scope of application (-15~45℃);
● Best temperature of application (20±5℃);
● Special filter installation for acid fog proof;
● Transparent container, convenient to observe;
● Super long service life.
Applications:
● Telecommunications
● Cable Television
● Electric Utility
● Alarm & Security system
● UPS
● Control Equipment
● Medical Equipment
● Railroad Utility
● Photovoltaic System
● Alternative Energy System
● High Power Backup Supply
Maintenance
● No dust falls in the battery.
● No organic solution into the battery room; let alone the battery.
● Give periodically supplementary charge to the battery for long storage.
● Each setting parameter shouldn’t exceed the regular range of this manual.
● No over charge or over discharge for normal operation.
Precautions
● Do use special tools.
Do use special tools, instead of common tools during electrical connections. In addition, keep the tools in good insulation condition (e.g. wrap insulating tape around the bare metal parts) before using them to avoid short circuit and personal injury caused by tool contact with any live objects.
● Fire hazard
During battery installation, make sure to fix the connecting terminals of the conducting wire tight, and keep the output terminals of the batteries clean. Otherwise, it may lead to a high temperature of battery terminals and even to spark/fire.
● Operation regulation
Before battery operation, read the safety precaution/instruction, and the operation instructions, especially the battery interconnection instructions.substandard operation will cause danger.
Prevent battery short circuit and prevent battery electrolyte from flowing out.
Overflowed electrolyte is a latent danger and it will erode the metal object and circuit board, thus damaging the equipment and causing short circuit of the circuit board.
Tips
● Avoid installing the battery in an atmosphere where organic solvents or adhesives may be present. Do not clean the battery with oils, thinners or similar substances. Use water only. The case and cover of the battery is ABS plastic resin which may suffer damage from these chemicals.
● Provide free air space between batteries when more than two are grouped together. The recommended distance is 0.2" to 0.4" (5mm to 10mm).
● Always wear insulated gloves when handling batteries; especially when series and parallel connecting groups of batteries.
● Battery life is dependent on its operating conditions. Please refer to the life curves published in this Applications Manual. These curves represent typical results under optimum operating conditions. Actual life will vary greatly due to variability of these conditions. To obtain optimum battery performance for standby service, CGB recommends that within five years of use, the batteries be replaced.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.