GEL maintenance free Non Spillable 2v sealed rechargeable battery 120AH High Capacity
GEL maintenance free Non Spillable 2v sealed rechargeable battery 120AH High Capacity
Description
Sealed Construction
The unique construction and sealing techniques of the battery guarantee leak
proof operation in any position with no adverse effect to capacity or service life.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting of a high
porosity, glass fiber material which in conjunction with plates, totally absorb and
contain the electrolyte.
Gas Recombination
CGB batteries incorporate a built-in design that controls gas generation and
induces recombination of more than 99% of gases generated during float or
cyclic usage.
Maintenance Free Operation
Due to the perfectly sealed construction and the recombination of gasses within
the cells, the battery is almost maintenance free.
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to operate
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of performance
and service life in either float or cyclic applications.
Cyclic Service Life
More than 600 discharge/recharge cycles can be realized from CGB CB and HR
batteries, dependent on the average depth of discharge.
Float Service Life
SE and CB, HR Series batteries have an expected life span of 3 to 5 years in
float service applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of rated
capacity per month.
Operating Temperature
CGB Batteries may be operated over a broad range of ambient temperatures.
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep discharges
Specifications
| Nominal Voltage | 12V | Capacity | C10 | 120Ah (10.5V, at 25℃) | |
| Nominal Capacity (C10) | 120Ah (10.5V,at 25℃) | C5 | 96Ah (10.5V, at 25℃) | ||
| Dimension | Length 407mm | C3 | 90Ah (10.5V, at 25℃) | ||
| Width 173mm | C1 | 66Ah (10.2V, at 25℃) | |||
| Height 209.5mm | Internal Resistance | Approx. 5 mΩ (25℃) | |||
| Total Height 234.5mm | Max Short-duration Discharge Current | 2400A(25℃) | |||
| Weight | Approx. 38.41kg | Terminal | FP-05/RT-20 | ||
Feature
Designed life for floating charge is 5 years (20℃)
Design with flat plate, GEL electrolyte and AGM separator technology
GEL electrolyte inside of battery keeps uniformity condition, battery is with
excellent cycle life
GEL electrolyte has huge thermal capacity, thermal runaway phenomena never
occur
High strength ABS material for container & lid
Wide temperature scope of application(-15~45℃)
Best temperature of application(20±5℃)
No leaking, safe and reliable
Standing or lying down for using, convenient to transport and install
Low self-discharge rate.
STORAGE
Batteries should be stored in dry and clean warehouse which has good air
exchange system. Batteries should avoid direct sunlight. Batteries should not
be near to heat (such as radiator, the distance should more than 1m). Batteries
should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before using.
Charging methods: maximum charging current 3.0A, constant voltage
2.45±0.05V/cell (25℃);
Charging time: 15~20h; Temperature compensation coefficient: -5mV/℃/cell.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.