12V65AH 6-CNF-65B ABS V0 Plastic Frequent discharge For Solar Wind System Battery

Description:

1.Using oxygen recombination technology: maintenance-free

2.PbCaSn alloy for plate grids: less gassing, less self-discharging

3.High quality AGM separator: extend cycle life and prevent micro short circuit

4.ABS material: increase the strength of battery container. (Flame-retardant ABS

is optional);

5.High purity raw material: ensure low self discharge rate

6.Silver-coated copper terminals (T1, T2 terminal), brass insert terminals and

lead terminals improve theelectric conductivity

Specifications

Feature:

Positive plate – Thick high Sn low Ca grid with high density paste

Negative plate – Over designed capacity to overcome sulphation at low SOC

Separator – Advanced AGM separator

Electrolyte – Dilute high purity sulphuric acid with nano gel

Battery container and cover – ABS

Pillar seal – 100% factory tested, proven two layers epoxy resin seal

Relief valve – Complete with integrated flame arrestor

Applications

1.Cycle Use

Portable VTR/TV, tape recorders, radio, etc.

Power tools, lawn mowers, vacuum cleaners

Cameras and photographic equipment

Portable personal computers, word processors, portable terminals, etc.

Portable measuring equipment

Portable telephone sets

Various power toys and hobby equipment

Lighting equipment

Standby Use

Communications and electric equipment

Emergency lighting equipment

Fire alarm and security systems

Notice:


Don’t charge in the sealed container.

Please use cotton cloth to clean, if the battery is broken down and leak

electrolyte. Please wash your skin when touch the electrolyte.

You should be careful and regular check when use the battery. To avoid the

battery don’t work. You should change the battery if the capacity is not full or has

been damage, especially after one year using.

Don’t put the battery in the fire, or it will explode.