DIN 6923 High Quality Stainless Steel 304 316 hex Flange Nut

1.Product Description

Flange nuts, also known as the nut with pad, flower tooth nut, six flange nut, flange nut etc.. Mostly used in pipe connection or need to increase the nut contact surface of the workpiece.

Self locking nuts, pine nut, locking nut, four claw nut, screw in nut lock nut, a thin rod screw self-locking nuts hexagon cap nut special foundation bolt with nut, hex crown shaped thin eyebolt nut connection.
Fine teeth, all metal, six angle, all metal, six angle, all metal, angle, flange, fine, non metallic, non metallic, six angle, and six angle, flange, and nut
Square weld nuts six welding nut fastening nut embedded circular nuts
Round nut with hole end round nut with grooves with side hole round nut round nuts
Round nut ring nut

2.Specification

3.Application 

Flange nut and the hexagonal nut size and thread specification is basically the same, just above the hexagon nut compared, it is washers and nuts is integrated, and in the following anti-skid tooth pattern, there is an increase in the nut and the workpiece surface area contact, compared to the common nut and washer combination, more solid and tension.
Generally common flange nut specifications are generally below M20, because most of the flange nuts are used in the pipe and flange, so by the workpiece constraints, flange nut specifications compared to the nut. M20 above some of the flange nuts are mostly flat flange, that is, there is no tooth pattern on the flange, most of these nuts are used in some special equipment and special places, the general sales of the manufacturers are not on the spot.

4.Advantage 

5.more pictures