Carbon Steel Size Zinc Plated Round Base T Nut Brad Hole Tee Nut
Price:
Negotiation
MOQ:
Negotiation
Delivery Time:
10-20 days
Brand:
HNF
Product Description
Carbon Steel Size Zinc Plated Round Base T Nut Brad Hole Tee Nut
Description:
The formulation of the process of adding EereS to 1 Axis
The processing process of shaft is based on the structure and technical requirements of shaft = production batch.
And equipment conditions.
This product adopts ladder shaft, blank adopts solid forgings. Analysis of processing process of 2 Axis
D) rough processing stage. The main purpose of this stage is to remove most of the parts with a large amount of cutting.
Spare amount, the blank is processed close to the final size and shape of the workpiece, leaving only a small machining margin. The defects such as cracks in forgings can also be found in time in the reform stage, so as to take corresponding measures.
A blank treatment. Preparation, forging and normalizing
B rough machining. Remove excess parts, milling end faces, piercing spikes and outer circles of rough cars, etc.
2) semi-finishing stage. The main purpose of this phase is to prepare for intensive work.
Yes
Some surfaces with low requirements are processed to the requirements specified in the drawings at this stage.
A heat treatment before semi-finishing. 45 steel was quenched and tempered.
B semi-finishing. Car positioning conical hole, semi-fine car outer round end face.The formulation of the process of adding EereS to 1 Axis
The processing process of shaft is based on the structure and technical requirements of shaft = production batch.
And equipment conditions.
This product adopts ladder shaft, blank adopts solid forgings. Analysis of processing process of 2 Axis
D) rough processing stage. The main purpose of this stage is to remove most of the parts with a large amount of cutting.
Spare amount, the blank is processed close to the final size and shape of the workpiece, leaving only a small machining margin. The defects such as cracks in forgings can also be found in time in the reform stage, so as to take corresponding measures.
A blank treatment. Preparation, forging and normalizing
B rough machining. Remove excess parts, milling end faces, piercing spikes and outer circles of rough cars, etc.
2) semi-finishing stage. The main purpose of this phase is to prepare for intensive work.
Yes
Some surfaces with low requirements are processed to the requirements specified in the drawings at this stage.
A heat treatment before semi-finishing. 45 steel was quenched and tempered.
B semi-finishing. Car positioning conical hole, semi-fine car outer round end face.
The processing process of shaft is based on the structure and technical requirements of shaft = production batch.
And equipment conditions.
This product adopts ladder shaft, blank adopts solid forgings. Analysis of processing process of 2 Axis
D) rough processing stage. The main purpose of this stage is to remove most of the parts with a large amount of cutting.
Spare amount, the blank is processed close to the final size and shape of the workpiece, leaving only a small machining margin. The defects such as cracks in forgings can also be found in time in the reform stage, so as to take corresponding measures.
A blank treatment. Preparation, forging and normalizing
B rough machining. Remove excess parts, milling end faces, piercing spikes and outer circles of rough cars, etc.
2) semi-finishing stage. The main purpose of this phase is to prepare for intensive work.
Yes
Some surfaces with low requirements are processed to the requirements specified in the drawings at this stage.
A heat treatment before semi-finishing. 45 steel was quenched and tempered.
B semi-finishing. Car positioning conical hole, semi-fine car outer round end face.The formulation of the process of adding EereS to 1 Axis
The processing process of shaft is based on the structure and technical requirements of shaft = production batch.
And equipment conditions.
This product adopts ladder shaft, blank adopts solid forgings. Analysis of processing process of 2 Axis
D) rough processing stage. The main purpose of this stage is to remove most of the parts with a large amount of cutting.
Spare amount, the blank is processed close to the final size and shape of the workpiece, leaving only a small machining margin. The defects such as cracks in forgings can also be found in time in the reform stage, so as to take corresponding measures.
A blank treatment. Preparation, forging and normalizing
B rough machining. Remove excess parts, milling end faces, piercing spikes and outer circles of rough cars, etc.
2) semi-finishing stage. The main purpose of this phase is to prepare for intensive work.
Yes
Some surfaces with low requirements are processed to the requirements specified in the drawings at this stage.
A heat treatment before semi-finishing. 45 steel was quenched and tempered.
B semi-finishing. Car positioning conical hole, semi-fine car outer round end face.
Specification:
| Item | Carbon Steel Size Zinc Plated Round Base T Nut Brad Hole Tee Nut |
| size | M3, M4, M5, M6, M8, M10, M12, # 6, # 8, # 10,1 / 4,5 / 16,1 / 2 |
| Material Available | Stainless Steel A2-70 A4-80 Carbon Steel |
| Surface treatment | Passivate, Plain, zinc plated |
| Heat treatment | Tempering, Hardening, Spheroidizing |
| Tolerance | 6g |
| Packing | carton box + pallet |
| Lead time | About 10-25 days. Reality time is according to customer's requirement |
| Place of Origin | China |
| Non-standards | OEM is available, according to drawing or samples |
| Samples | Free |
| Material | SS304, SS316, Gr4.8 Gr8.8 |
| Features | Good anti-corrosion ability |
| Certification | ISO9001:2008, SGS |
| OEM service is also available | |
Material:
| Material | C | Si | Mn | P | S | Ni | Cr | Mo | Other |
| 201 | 0.15 | 1 | 5.5-7.5 | 0.06 | 0.03 | 3.5-5.5 | 16-18 | N≤0.25 | |
| 304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.0-10.0 | 18-20 | ||
| 304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 8.0-12.0 | 18-20 | ||
| 321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.0-13.0 | 17-19 | Ti≤5*C% | |
| 316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.0-14.0 | 16-18 | 2-3 | |
| 316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 10.0-15.0 | 16-18 | 2-3 | |
| 309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 12.0-15.0 | 22-24 | ||
| 410 | 0.15 | 1 | 0.03 | - | 11.5-13.5 | ||||
| 420 | 0.26-0.4 | 1 | 0.03 | - | 12-14 | ||||
| 430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | - | 16-18 |
Application:
The kep nuts are mainly used in machinery, furniture, appliances, electronics / computer, automobile, sports equipment and other industries metal fastening accessories.
Advantages:
1. Over 6 years of manufactiring experience
2. Many kinds of stock
3. Competitive price
4. Quality control system
5. Durability testing and critical technical design
6. Customized services
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Jiaxing Haina Fastener Co.,Limited
Location
B1306 Landmark Plaza No.1238 Hongxing Road JiaXing , ZheJiang , China 314001
Contact Person
TonyFang