Round Base Brad Hole Round Insert Corrosion Resistant Tee Nut
Price:
Negotiation
MOQ:
Negotiation
Delivery Time:
10-20 days
Brand:
HNF
Product Description
Round Base Brad Hole Round Insert Corrosion Resistant Tee Nut
Description:
The feeding and unloading device is placed on the bench. When the workpiece (plate) is emptied and pulled down from the main engine, the motor 7 (shown) starts through the transmission shaft (2, 3, 4, 5, 6).
Move the chain to turn, push block 1 from the lower chain to the upper chain, push from the side of the workpiece
The workpiece, several pushing push the workpiece at the same time, the workpiece is pushed upside down on the roller of the inclined plane of the blanking box,
In order to slide into the material box by gravity. The push can turn to the lower chain, close to the switch and sense the push.
Block, send a signal to the control center, and the control center issues instructions to stop the motor 7 from
The push block stops in the chain below and completes a working cycle.The feeding and unloading device is placed on the bench. When the workpiece (plate) is emptied and pulled down from the main engine, the motor 7 (shown) starts through the transmission shaft (2, 3, 4, 5, 6).
Move the chain to turn, push block 1 from the lower chain to the upper chain, push from the side of the workpiece
The workpiece, several pushing push the workpiece at the same time, the workpiece is pushed upside down on the roller of the inclined plane of the blanking box,
In order to slide into the material box by gravity. The push can turn to the lower chain, close to the switch and sense the push.
Block, send a signal to the control center, and the control center issues instructions to stop the motor 7 from
The push block stops in the chain below and completes a working cycle.
Move the chain to turn, push block 1 from the lower chain to the upper chain, push from the side of the workpiece
The workpiece, several pushing push the workpiece at the same time, the workpiece is pushed upside down on the roller of the inclined plane of the blanking box,
In order to slide into the material box by gravity. The push can turn to the lower chain, close to the switch and sense the push.
Block, send a signal to the control center, and the control center issues instructions to stop the motor 7 from
The push block stops in the chain below and completes a working cycle.The feeding and unloading device is placed on the bench. When the workpiece (plate) is emptied and pulled down from the main engine, the motor 7 (shown) starts through the transmission shaft (2, 3, 4, 5, 6).
Move the chain to turn, push block 1 from the lower chain to the upper chain, push from the side of the workpiece
The workpiece, several pushing push the workpiece at the same time, the workpiece is pushed upside down on the roller of the inclined plane of the blanking box,
In order to slide into the material box by gravity. The push can turn to the lower chain, close to the switch and sense the push.
Block, send a signal to the control center, and the control center issues instructions to stop the motor 7 from
The push block stops in the chain below and completes a working cycle.
Specification:
| Item | Round Base Brad Hole Round Insert Corrosion Resistant Tee Nut |
| size | M3, M4, M5, M6, M8, M10, M12, # 6, # 8, # 10,1 / 4,5 / 16,1 / 2 |
| Material Available | Stainless Steel A2-70 A4-80 Carbon Steel |
| Surface treatment | Passivate, Plain, zinc plated |
| Heat treatment | Tempering, Hardening, Spheroidizing |
| Tolerance | 6g |
| Packing | carton box + pallet |
| Lead time | About 10-25 days. Reality time is according to customer's requirement |
| Place of Origin | China |
| Non-standards | OEM is available, according to drawing or samples |
| Samples | Free |
| Material | SS304, SS316, Gr4.8 Gr8.8 |
| Features | Good anti-corrosion ability |
| Certification | ISO9001:2008, SGS |
| OEM service is also available | |
Material:
| Material | C | Si | Mn | P | S | Ni | Cr | Mo | Other |
| 201 | 0.15 | 1 | 5.5-7.5 | 0.06 | 0.03 | 3.5-5.5 | 16-18 | N≤0.25 | |
| 304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.0-10.0 | 18-20 | ||
| 304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 8.0-12.0 | 18-20 | ||
| 321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.0-13.0 | 17-19 | Ti≤5*C% | |
| 316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.0-14.0 | 16-18 | 2-3 | |
| 316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 10.0-15.0 | 16-18 | 2-3 | |
| 309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 12.0-15.0 | 22-24 | ||
| 410 | 0.15 | 1 | 0.03 | - | 11.5-13.5 | ||||
| 420 | 0.26-0.4 | 1 | 0.03 | - | 12-14 | ||||
| 430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | - | 16-18 |
Application:
The kep nuts are mainly used in machinery, furniture, appliances, electronics / computer, automobile, sports equipment and other industries metal fastening accessories.
Advantages:
1. Over 6 years of manufactiring experience
2. Many kinds of stock
3. Competitive price
4. Quality control system
5. Durability testing and critical technical design
6. Customized services
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Jiaxing Haina Fastener Co.,Limited
Location
B1306 Landmark Plaza No.1238 Hongxing Road JiaXing , ZheJiang , China 314001
Contact Person
TonyFang