DIN7337 Flat Head Closed End Stainless Steel Aluminum Blind Rivets
DIN7337 Flat Head Closed End Stainless Steel Aluminum Blind Rivets
Description
Blind rivets, commonly referred to as "pop" rivets are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off.
| DIN7337 Flat Head Close End Stainless steel / Aluminum Blind Rivet | ||||||||
| Dia. | D | 3 | 3.2 | 4 | 4.8 | 5 | 6 | 6.4 |
| Max | 3.08 | 3.28 | 4.08 | 4.88 | 5.08 | 6.08 | 6.48 | |
| Min | 2.9 | 3.1 | 3.85 | 4.65 | 4.85 | 5.85 | 6.25 | |
| Rod diameter | Max | 6 | 6 | 7.5 | 9 | 9 | 11 | 12 |
| Min | 5.6 | 5.6 | 7 | 8.5 | 8.5 | 10.3 | 11.3 | |
Application
blind rivets are used mainly when access to the joint is available from only one side. The rivet is placed in a drilled hole and is set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. As the head of the mandrel reaches the face of the blind side material, the pulling force is resisted, and at a predetermined force, the mandrel snaps at its break point, also called blind setting. A tight joint formed by the rivet body remains, the head of the mandrel remains encapsulated at the blind side, although variations of this are available, and the mandrel stem is ejected.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.