Two Red Round 3.0 mm Indicator LED , Indicator Housing Power Led Diode
Price:
USD 0.1-0.18/PCS
MOQ:
5000 PCS
Delivery Time:
5-7 working days after received your payment
Brand:
Double Light
Product Description
Two Red Round 3.0mm Indicator LED , Indicator Housing Power Led Diode
This is Our Two Round 3.0mm Red Indicator Housing LED.
RED LED Light Components
Features
- Standard T-1 3/4 diameter package
- Wide viewing angle
- General purpose leads
- Reliable and rugged
| Part NO. | Chip Material | Lens Color | Source Color |
| DL-H30D-2RD | GaAsP/GaP | Red Diffused | Red |
Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ±0.25(.010”)mm unless otherwise noted.
- Protruded resin under flange is 1.0mm(.04”) max
- Lead spacing is measured where the leads emerge from the package.
- Specifications are subject to change without notice
Absolute Maximum Ratings at Ta=25℃
| Parameter | MAX. | Unit |
| Power Dissipation | 100 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
100 | mA |
| Continuous Forward Current | 50 | mA |
| Derating Linear From 50℃ | 0.4 | mA/℃ |
| Reverse Voltage | 5 | V |
| Operating Temperature Range | -40℃ to +80℃ | |
| Storage Temperature Range | -40℃ to +80℃ | |
|
Lead Soldering Temperature [4mm(.157”) From Body] |
260℃ for 5 Seconds | |
Electrical Optical Characteristics at Ta=25℃
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity | Iv | 5 | --- | 32 | mcd | IF=20mA (Note 1) |
| Viewing Angle | 2θ1/2 | --- | 60 | --- | Deg | (Note 2) |
| Peak Emission Wavelength | λp | --- | 630 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 631 | --- | nm | IF=20mA (Note 3) |
| Spectral Line Half-Width | △λ | --- | 42 | --- | nm | IF=20mA |
| Forward Voltage | VF | --- | 2.0 | 2.8 | V | IF=20mA |
| Reverse Current | IR | --- | --- | 100 | µA | VR=5V |
Note:
- Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD
Location
Room 2711, Huishang Center, Jiahui New City, No. 3027 Shennan Middle Road, Futian District, Shenzhen City, Guangdong Province China 518033
Contact Person
Chen