Petroleum Oil and Gas Drilling Equipment Choke Manifold , API 16C Choke Manifold

Choke Manifold

1. Application

Choke and Kill Manifold is used to control well kick and pressure. In case of well kick or blowout, Choke Manifold may control downhole pressure by valves open/close. Heavy slurry may be pumped into well by Kill Manifold to reach pressure balance. Besides, Choke Manifold can be applied to well cleanup and blow-off.

Choke Manifold Control pressure to prevent overflow and blowout. Reduce wellhead casing pressure by relief function of choke valve. Full-bore and two-way metal seal Choke bean features hard alloy inside, delivering high resistance to erosion and corrosion. The relief valve helps to reduce casing pressure and protect BOP.

2. Main Configuration

TR choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components.

3. Working Principles

When the pressure rising in well,fluid in well can be released in utilization of the choke valve opening/closing in choke manifold to control casing pressure, which can directly blow out through gate valve when the casing pressure is quite high.

4. Specification

Pressure classes 5000psi, 10000psi, 15000psi. Can also be designed according to requirement of client.

Choke manifolds are manufactured according to API Spec 16C.
Working Pressure: 5,000psi ~ 15,000psi
Nominal Bore Size : 2 1/16 - 4- 1/16"

5. Operating characteristics of Our Choke Manifold:

1. The working pressure of all components on the choke manifold shall be compatible with that of the BOP stack used.
2. The pressure gauge must be installed.
3. The choke manifold shall be installed at the place where the operator can reach it easily. The pressure test must be performed prior to installation and the seat test pressure shall be equal to the rated working pressure.
4. In winter, the choke manifold can work under a low temperature condition.
5. The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 degree steel bent pipe shall be used. The bore of the line pipe shall be large enough.

Specifications of Our Choke Manifold:

Competitive Advantages

1. We offer high quality products at competitive price.
2. Shortest delivery time.
3. Flexible payment terms.
4. Timely after-sale service.
5. Most of our equipment can be replaceable with international brands.
6. Our products have been exported to Argentina, Egypt, US, Australia, Romania, Pakistan, Dubai, Abu Dhabi, Iran, India, Indonesia, Vietnam, Malaysia and many other countries.

Company Tenet

Customer's satisfaction is the highest pursuit of TR Solids Control.