For metal roofing machine, leveling machine, automatic uncoiler

The leveling machine needs to keep the leveling roller clean during use, otherwise the printed product will leave a mark. However, during the processing, debris and other debris will inevitably enter the upper leveling roller group or the lower leveling roller. s.

On the one hand, it affects the leveling effect, on the other hand, it also hinders the operation of the leveling roller, so it needs to be cleaned up in time.

The upper and lower roller sets of the ordinary leveling machine are fixed after adjusting the set gap.

Therefore, usually the two upper and lower rollers cannot be cleaned and maintained, but after a period of time, the upper and lower roller groups can be disassembled in a time-consuming manner before being carried out, and then the time interval is replaced and the gap is adjusted. .

In this way, maintenance is very inconvenient and wastes labor, thus increasing production costs.

In order to improve the quality of the processed products and reduce the production cost, Ruihui Machinery produces a split-type precision leveling machine. The upper frame is hinged to the lower frame and can be lifted relative to the lower frame.

When the leveling machine is working, the upper frame is lowered, the free end of the upper frame is pressed on the lower frame, and then locked by the locking device, the leveling machine operates normally, and the material is leveled.

When cleaning the inside of the planer, loosen the locking device, pick up the free end of the upper frame, and rotate the upper frame around the hinge to expose the flattening rollers for easy cleaning.

Products:

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi