This synthetic rubber-based hot melt pressure sensitive adhesive is specifically engineered for medical tapes, plasters, and bandages applications. The product features excellent tack, peel strength, shear resistance, and superior aging performance.

• Medical tapes, plasters, and bandages
• Wound dressing applications
• Other pressure sensitive adhesive applications requiring high bond strength, tack, and shear resistance

The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150-180℃ depending on machines, substrates, and plant conditions.

The product complies with FDA Indirect Food Contact Regulation of 21 CFR 175.105, "Adhesives".

6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. Please consult sales representative for special requirements.

The intact packing material can be stored indoor for 24 months from the date of manufacture in original packages under dry and clean conditions at ambient temperature below 35℃ and above 5℃. Direct sunlight and moisture condensation must be prevented.

• Do not mix with other adhesives to prevent contamination
• The material is applied hot - appropriate personal protective clothing and eye protection are strongly recommended to prevent burns
• Adequate ventilation is suggested to remove any vapors or fumes generated
• Rotate stocks and use the oldest stock first