1600mm Full Automatic Flute Laminating Machine For Making Corrugated Cardboard

1600mm New Type Full Automatic Flute Laminating Machine for making corrugated cardboard

Introduction:

1 Suitable for laminating of cardboard and corrugated cardboard in 150-600 g/m² .

2 The vacuum suction-type feeding system can lead the paper accurately into the machine;cycle stacking planes in a state of non-stop the next batch of paper stack well, so that more efficient.

3 Using suction automatic feeding of bottom sheet, according to the main machine operating speed, continuous automatic tracking.

4 The machine operation is stable, surface paper with corrugated paper joint very accurate. The corrugated paper never pull ahead, surface paper's location is easy adjust.

5 Machine uses touch-screen/PLC/servo motor control system, double frequency control type , the circuit system is stable, and can automatically display the failure alarm.

6 Automatic gluing, and the glue can be used circulatory, avoid glue waste.

7 Measure roller line-speed design scientifically, avoid glue fly out when the speed is high.

8 Pressure rollers adopt unilateral adjustment, convenient and fast.

9 Cleaning type : bottom roller is extruded by rubber roller to clean the bottom laminating pressure roller, ensure the cleaner on the reverse of the bottom paper . Make glue etc. foreign matter after washing direct subside in tank. At the same time , adopting the gear and chain to control the lifting of tank, can take out the tank easily and convenient to wash .

9The pressure conveyor adopt floating movable structure , total length 5m , equipped with 28 paper pressing rollers , make the cardboard uniform bearing strength in pressing process.

10 Counter designs scientifically, easy recording the amount you have been worked.

11 Small pressure table (optional) . length 2.5m , big pressure table length 5m.