PLC Touch Screen Control Thermal Insulation Rock Wool Thermal Load Testing Equipment

Application:

Suitable for rock wool, slag wool and glass wool and products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage. Through calculation, the shrinkage temperature of the heat load is determined by interpolation.

Meet the standards:

in line with GB/T11835 standards.

Technical parameters

The heat load test device consists of a heating furnace, a heating vessel, and a temperature sensor.

Ambient temperature: room temperature ~ 40 °C relative humidity: ≤ 75%

Working voltage: AC 220V±10V50Hz

Heating power: 1000W

Zoom measurement range: room temperature -900°C

Heating rate: 5°C/min±0.3°C and 3°C/min±0.2°C can be set

The instrument uses a single computer, multi-point program to warm up

Heat source adopts hot plate type, safe and reliable, long service life

The instrument is equipped with a faceplate printer, which can print test results in time.