DIN Rubber Testing Equipment , Abrasion Resistance Test Synthetic Leather Products
DIN Abrasion Resistance Testing Equipment for Rubber and Synthetic Leather Products
Quick Details:
| Name | DIN abrasive tester |
| Usage | test the friction of surface of rubber , tire, conveyor belt, shoe sole, synthetic leather |
| Power | 1∮,AC220V,3A |
| Weight | 61kg |
| Volume | 70×30×30cm |
Description:
The tester is for the measurement of abrasion resistance or rubbers (vulcanized thermoset rubbers and thermoplastic elastomers) that are subject to abrasive/ frictional wear in actual service. The abrasion resistance is measured by moving a test piece across the surface of an abrasive sheet mounted to a revolving drum, and is expressed as volume loss in mm3 or abrasion resistance index in percent. For volume loss, a smaller number indicates better abrasion resistance, while for the abrasion resistance index; a smaller number denotes poorer abrasion resistance.
Technical parameters:
| Sample | Diameter of 16mm,thickness of 6~15mm |
| Fixture load | 2.5N |
| Weight load | 2.5N,5N |
| Fixture lateral moving distance | 4.2mm/circle |
| Diameter of the cylinder | (150±0.2)mm |
| Length of the cylinder | 460mm |
| Rotation speed of the cylinder | 40rpm |
| Distance reservation | 40m/20m(equals 84 circles/42 circles) |
| Abrasion speed | 0.32m/sec |
| Incline angle | 3°(the angle between sample support axle and the vertical plane of cylinder) |
| Volume | 70×30×30cm |
| Weight | 61kg |
| Power | 1∮,AC220V,3A |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.