Wire Testing Equipment High Power Wire and Cable Withstand Voltage Tester

Introduction:

DX8346 high-power wire and cable voltage-resistant testing machine is the control equipment for high-capacity high-voltage automatic power frequency withstand voltage test of the cable, and controls the step-up and step-down, balance and load protection of the high-voltage test, and is an important test equipment for ensuring the cable product.

Suitable for high voltage test of motor, household appliances, instruments, electronic devices, insulation materials, and wires and cables. When the power frequency withstand voltage test of wire and cable is carried out, because of the large capacitance between the electrodes and the large capacitance current when the processing frequency voltage is applied, a large capacity transformer is needed. The larger the cable, the longer the cable and the larger the capacitance, the greater the transformer capacity required. When the maximum test voltage of the press is 5kV, it can withstand capacitance current below 5A, and the capacity can reach 25kV.

Technical parameters:

Standard:

UL62,UL1581,JIS C 3005,VDE0472,GB5023,GB5013

Conditions of Use:

- The altitude shall not exceed 1000 meters.

- The environmental humidity does not exceed 40 °C and is not less than-10 °C.

- The maximum relative humidity of air is 85%.

- Need to be installed in no explosion gas, no rain and snow, no strong vibration and dry occasions.