Heatless Desiccant Absorption Compressed Air Dryer with PLC for air compressor -40--70℃ zero air consumption

Dew point: -40 °C - -70°C 

ISO, CE certificated With world-top activated Aluminum & Molecular contents.

 
 
10.7m3/min customized 6-10bar pressure with less air consumption.
 

Features of Regenerated adsorption desiccant air dryer for air compressor :

 
Capacity: 10.7m3/min Working Pressure: ≤10bar
Max.inlet temp: 45°C
 
Max Ambient Temp:50°C
Min.Ambient Temp: 5°C
 
Refrigerant:Activated Aluminum &Molecular Siere
 
Dew Point: -40°C - -70°C
 
 

 

 

Time Proven Design:

*Rust Prevention: have been treated against corrosion, it does not need to be treated against corrosion and dust again within 10 years on the promise that normal maintenance is ensured.

*Various Valves provides reliable and long service life.

*Vessels have a large filling level of desiccant bed that allows compressed air has enough time to contact with desiccant. That is, more efficient on drying process in the Adsorption Dryer.

*Generously sized silencers ensure efficient noise reduction for the escaping regeneration air.

Ease of Monitoring:

*PLC Control Panel

*Electronic(Automatic)Drain Valve.

Safety Protection Systems for overheat and Systems Alarm and Stop for Errors and Overworking. Expand Machine Life.

*Each valve is controlled individually with a time-delay, which results in overlap-free switch-over without pressure peaks between adsorption and regeneration.

Minimum purge air use, less than 12%,the lowest in the industry

A . excellent designing tower ,save 95% of the heat of adsorption ,stored heat maintains purge maintains purge air temperature during regeneration.

Maximzing the purge air’s ability to carry off moisture ,minimizing the amount of purge air required.

B . drying and purging in counter flow arrangement, energy not wasted when wet air travels through dry desiccant.

C . ability to match purge air travels through dry desiccant.

Long desiccant life

A . suitable tower sized make the air velocity through the bed won’t fluidize desiccant,making good use of the desiccant.

B . rationalizing system ,remove oil and heavy contaminants before flow into the tower ,protects bed from contamination .using butterfly valve and reliable program controller which can be auto timing and auto switching, works stable and reliable ,unacted on electric net , pressure and electric field .

scientifically designed switch time ensuring the air pressure being stable and reliable , unactd on electric net, pressure and electric field, scientifically designed switch time ensuring the air pressure being stable ,running without waving. Non basement, easy to install.