Manual Hydraulic Pipe Bending Machine 1/4" - 1" SWG-1 With 10T Simple Design
Manual Hydraulic Pipe Bender Busbar Processing Machine 1/4" to 1" SWG-1 with 10T
SWG Aluminum Hydraulic Busbar Bending Machine Fixed Structure
Hydaulic Pipe bender Products
|
Item number |
06250 | 06250-1 | 06250-2 | 06250-3 | 06250-4 | 06250-5 |
| Model | SWG-25 | SWG-1 | SWG-2 | SWG-3 | SWG-4 | SWG-5 |
|
Out put |
60 | 100 | 160 | 180 | 200 | 200 |
|
(MM) Stroke |
120 | 160 | 230 | 320 | 380 | 380 |
| Wall thickness(mm) | 1.5-5 | 2-5 | 2.5-5 | 2.5-5 | 2.5-6 | 2.5-6 |
|
Weight |
16 | 20 | 47.5 | 97 | 137 | 186 |
|
(rad) Bending angle |
π/2≤a<π | π/2≤a<π | π/2≤a<π | π/2≤a<π | π/2≤a<π | ≤90° |
|
(mm) Pipe diameter |
Φ10 Φ13 Φ16 Φ19 Φ22 Φ25 |
Φ13 Φ16 Φ19 Φ22 Φ28 Φ34 |
Φ22 Φ28 Φ34 Φ42 Φ48 Φ60 |
Φ22 Φ28 Φ34 Φ42 Φ48 Φ60 Φ75.5 Φ89 |
Φ22 Φ28 Φ34 Φ42 Φ48 Φ60 Φ75.5 Φ89 Φ108 |
Φ22 Φ28 Φ34 Φ42 Φ48 Φ60 Φ75.5 Φ89 Φ108 Φ114 |
Configuration: It is suitable for bending and forming of galvanized water pipes,thick steel pipes, conductor pipes and gas pipes.
structure
1. Working cylinder
2. Rapid connector
3. Side of block
4. Spent on board
5. Under the flower plate
5. Roll column
6. R template
7. Clamp die
8. Right angle die
9. United pole plate
10. Pin
11. Car
12. High pressure pipeline
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.