Monocular Waveguide 0.23" 640*400 OLED Display Module For Head Up Display
Sony 336C 0.23 Inch Waveguide 640 * 400 OLED Micro Display Module For HUD
Product introduction
0.23 inch optical waveguide module is composed of three parts, an OLED ( Organic Light-Emitting Diode ), an optical engine and a geometrical waveguide. The OLED image collimated by the optical engine; the final imaged will be guided into the geometrical waveguide. Finally, an 52” virtual image displays at 3 meters away, the FOV (Field of View) can reach 25 degrees at that point.
The OLED uses Sony 336C.
Product Details
| Display Technology | Waveguide |
| Virtula Screen Size |
52"(3M) |
| Resolution | 640X400 |
| Waveguide Lens Thickness | 1.5mm |
| FOV | 25° |
| Eye-box | 15*10 mm |
| Eye Relief | 26.5mm |
| Transmittance Rate | ≥82 |
| LCOS Screen Size | 0.23" |
Power up sequence
- Set XCLR to low and turn on 1.8V power supply to initialize.
- 1ms after completion of 1.8 V power supply rising, set XCLR to high, then the panel changes to the power-saving mode.
- After XCLR set to high, turn on 10V power supply.
- Implement all the register settings and perform PS register off by serial communication to cancel power-saving mode.
- Then the panel changes to the normal state.
The display mode of the binocular module
The left-eye module is worn on the user’s left-side and the optical imaging will display in front of the left eye. The right-eye module is worn on the user’s left-side and the optical imaging will display in front of the right eye.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.