High Power Lithium Solar Batteries 48V 200AH With BMS / IP65 Metal Case
High Power Lithium Solar Batteries 48V 200AH with BMS , IP65 Metal Case , ROHS
Brief Instroduction
VICT SAILING POWER advanced lithium-ion batteries delivers high power, long cycle life, exceptional performance, and robust safety for tough applications. Available in different sizes.
VICT Battery Advantages:
High Performance
High power delivery with stable energy capacity
Integrated communications and intelligence
Simple, fast charging
Long Life
100% deep discharge cycle life
Excellent endurance
Tough, Critical Applications
Superior energy density and light weigh
Strong performance across temperature extremes
Robust Safety
Integrated voltage, current, and temperature protections
High-quality design and manufacturing
Safe, reliable, high-performance Li-NCM chemistry
Company Advantages:
Very Fast Reply with 7 x 24 Hours service for you.
Specifications
| Battery module Type | 48V 200Ah Li-NCMBattery Module |
| Single cell | 10Ah / 60*12*190mm |
| Dimension (L*W* H) |
860*350*280mm 260 pcs of 10Ah cells, as 13S20P |
| Weight | ≤ 96 Kg |
| Operation Voltage of battery pack | 48.1V (3.7V for cell) |
| Charging Voltage of battery pack | 54.6 V (4.2V for cell) |
| Discharge Cut-off Voltage, battery pack | 39V (3.0V for cell) |
| Charge & discharge Terminals |
S-type: 2 terminals D-type: 4 terminals |
| Maximum continuous discharge current | up to 400A countinous |
| Maximum peak discharge current | up to 600A within 30 seconds |
| Maximum charge current | up to 200A for continuous |
|
Working temperature (Inside temperature of module) |
-20°C ~ 55°C / best for 5°~45°C |
| Recommended working temperature | 5 °C ~45 °C |
Charge and Discharge Curve
Packaging
Workshop
Remarks:
Different charge and discharge currents require a different sized BMS, so please specify the continuous and maximum charge/discharge currents for module. Bestgo will customize these packs to fit the application, as a result the cost of module will vary slightly dependent on the BMS
selection. There are two kinds of output terminals available. The S, for single, two conductor output, and the D, for double, four conductor input and output. The S-type will only offer one (1) set of wires with two leads marked as plus ‘+’ and ‘minus ‘-‘ for both charge and discharge. The D-type will offer two (2) sets of wires. Each set has two (2) leads of ‘+’ and ‘-‘. One set for charging and the other is for discharging. The cost for the S-type is higher than the D-type.
How Battery Energy Storage Works
When electricity generation exceeds electricity demand frequency increases and when demand exceeds supply frequency decreases. Battery energy storage systems help to balance the frequency by import electricity from grid when frequency is too high and when frequency is too low exporting electricity into the grid
Battery energy storage system can be used to help high electricity users to avoid non-commodity electricity charges, especially during charging at peak time. By installing a battery energy storage system to avoid paying peak time non-commodity electricity charges.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


